Barre de reservoire
★
★
★
★
★
meilleur serge (QC) | January 8th, 2024
C est pour une f850 gsa 2023
Verified Buyer
Beautiful bars (Not for long)
★
★
★
★
Jay | June 14th, 2023
Amazing bars, matches the finish on the factory crash bars exactly and blends well with the overall lines of the bike.
One big gripe: The written instructions aren't great, and the included pictures don't do a very good job showing you the frame mounting point. Wunderlich produces a fantastic Youtube instructional on installing this exact product, so I highly recommend you look that up.
Nicanor (Cuenca, Ecuador) | May 22nd, 2023
The product was perfect for my motorcycle. Thanks a lot.
Verified Buyer
Fits like a glove!
★
★
★
★
★
Mark (Texas) | April 16th, 2023
I love the finished result, getting there was a nightmare for me. This would have been a much easier installation if another person with much smaller hands/fingers could have helped. Everything is engineered so well and fits so perfectly - that wasn't the issue. Getting my bear paws in the spots needed to insert bolts and nuts made it a tough install for me. Determination got it done but it took a while. I'd only suggest a person with small hands/fingers to get into the tight areas of the 850 GSA for the main bracket installation. After that, it was easy. The bars fit perfectly, look beautiful, and give you the piece of mind that your bike is protected in the event (aka when) you drop it. After all, its an "adventure" bike !
PEDRO DAVILA | December 27th, 2021
DOES IT FIT ON THE OEM ENGINE BARS THAT COMES IN THE F850GS ADVENTURE 40ANIVERSARY????
MARK MARTY | November 8th, 2021
Part # 41580400 Wunderlich Tank Bar, Stainless for 2021 f850 GSA 40 years. Easy to install, THEY LOOK FACTORY LEGIT! Great fitment and also i mounted auxiliary lights with 7/8 bar clamps to the upper front tank bars. large lights will easily mount to these bars keeping up high for added visibility. Another great product engineered well!
Part # 41580400 Wunderlich Tank Bar, Stainless and Reinforcement Bars
★
★
★
★
★
MARK MARTY | November 2nd, 2021
I Installed these on 2021 BMW F850 GSA 40 YEARS BIKE. TOOK ABOUT 2 HOURS , NOT TO DIFFICULT FOR THE BACK YARD MECHANIC. DIRECTIONS ARE A BIT VAGUE BUT JUST JUST USE COMMON SENSE AND IT WILL GO TOGETHER ! I USED HEAVIER DUTY NUTS AND BOLTS FOR THE CLAMP BRACKETS . THE TANK BARS AND LOWER REINFORCEMENT CRASH BAR LOOK GREAT AND WILL ADD PROTECTION FOR SURE ! ALSO I WAS ABLE TO MOUNT THE SWMOTECH AUXILIARY LIGHTS UP HIGH ONTO THE UPPER TANK BARS , WUNDERLICH HAS BETTER BETTER AUXILIARY FOR SURE BUT I ALREADY THE SW LIGHTS SO JUST RELOCATED THEM MUCH HIGHER . VERY NICE KIT!! GREAT UP GRADE! TAKE YOUR TIME ON THE INSTALL YOU WONT BE DISAPPOINTED. GOOD DAY MY FRIENDS
Really nice product
★
★
★
★
★
Joseph Billing | September 10th, 2021
Like the other reviews said, you are working in tight quarters. The instructions were ok, but the photos were a bit dark and hard to understand what they were showing. The only thing that the directions wasn't clear about was where the foam piece goes on the adapter. It goes on the most forward flat area so the beak can bounce of that instead of steel. Otherwise it's a nice piece of kit.
Verified Buyer
Tank Guards F850GSA
★
★
★
★
★
Eric Blaz | April 19th, 2021
As usual with all Wunderlich products the fitment is perfect. If you already have an accessory light kit installed in the high position as shown in the image on page 1 of the instructions...bolt #6 identified in the instructions can take some patience to put in place and tighten correctly. I did not need to remove my light bar but nimble fingertips are needed. I have a Clearwater accessory light kit, not the ones offered from Wunderlich so this may not be true for all.
Verified Buyer
F850GSA
★
★
★
★
★
Patrick Moore | February 11th, 2021
Fits great and looks good too!!! Two things that can help with the installation. 1. Remove the beak so you have more room to work. Its that black thing at the front of the bike. 2. Remove the bolt holding the steering dampener bolt and swing the dampener out of the way.
Instructions
