☎ +1.866.830.9990 Account | Wish List View Cart: 0 Items $0.00

All Items For This Bike

Handlebar Quick-Adjust graphics/00000001/8160112.jpg graphics/00000001/8160111.jpg graphics/00000001/8160109.jpg graphics/00000001/8160110.jpg

Handlebar Quick-AdjustPart Number: 8160109-111


5 out of 55 out of 55 out of 55 out of 55 out of 5

Customer ReviewsRead (or) Write a Customer Review

Choose Price Avail. Qty.
22 mm $46.95 In Stock
35 mm $46.95 In Stock
55 mm $46.95 In Stock
65 mm $46.95 In Stock

More Views (Click on the images below to enlarge)

Adjustment
Adjustment
Installed
Installed
F800 GS
F800 GS
08+ R1200 GS
08+ R1200 GS



Handlebar Quick-Adjusters

Sold as a pair

When riding off road, better control and best results can be achieved when standing on the pegs. When standing however, your arms reach the bars at entirely different angles than when sitting and therefore, the levers should ideally be repositioned for optimum comfort and control. The best tip, and one well known by experienced GS riders is to simply rotate the bars up and forward when traversing the technical off road sections and then rotate them back again when returning to the paved or gravel road. This trick does two things: it effectively raises the bars so that you don’t need to bend over as much and also positions the levers down, so they can more easily be reached while standing. As good an idea as this may be, it normally still involves the use of tools and stopping to dig out the proper wrench. With the Wunderlich Quick Adjusters, you’ll be able to rotate your handlebar quickly and easily with only a brief break in the action. Once installed, you’ll be able to loosen you handlebar clamps, adjust your bars and tighten them again, without the use of additional tools.

The handles have an internal spring and ratchet mechanism. By slightly lifting the handle against the spring, the lever can be positioned in one of 22 positions. This allows you to rotate the lever position and achieve the ideal point of leverage and also to position the levers to your liking after adjustment has been completed.

Please note this important ordering information! There are four lengths available. If your bike has bar risers made by someone other than Wunderlich, Remove one of the bolts where you intend to install the quick adjust and measure the length from the base of the head to the tip and order the closest match based on the information provided here. If you have Wunderlich handlebar risers or none at all, please make your choice based on the following information:

22mm Fits the following bikes:

  • HP2 Enduro
35mm Fits the following bikes without bar risers:
  • F650
  • F650 ST
  • F650 GS
  • F650 GS Dakar
  • G650 GS from 2011
  • G650 GS Sertao
  • R1100 GS
  • R1150 GS + Adventure
  • R1200 GS + Adventure up to 2007
  • R1200 GS LC 2013 – on
  • R1200 GS LC Adventure 2014 – on
  • Triumph Tiger Explorer
and the following bikes, with OR without Wunderlich* bar risers
  • R1200 GS 2008 – 2012
  • R1200 GS Adventure 2008 – 2013
  • F650 GS Twin
  • F700 GS
  • F800 GS
  • F800 GS Adventure

55mm
Fits the following bikes with Wunderlich* 25mm bar risers:

  • F650
  • F650 ST
  • F650 CS
  • F650 GS
  • G650 GS
  • R1100 GS
  • R1150 GS
  • R 1200 GS + Adventure up to 2007
  • R1200 GS LC 2013 –on
  • R1200 GS LC Adventure 2014 – on

65mm
Fits the following bikes with Wunderlich* 35mm bar risers:

  • F650
  • F650 ST
  • F650 GS
  • F650 GS Dakar
  • G650 GS
  • G650 GS Sertao
  • R1100 GS
  • R1150 GS
  • R1200 GS + Adventure up to 2007

* The reference is made to Wunderlich bar risers. If you have a different brand, please see the tip below.

Please Note:
These quick adjusters may also fit other brands of motorcycles. The size is M8x1.25 which is a very common size for handlebar clamp bolts.

Tip: If you are unsure which length you need for your particular setup, before ordering, remove one of your rear facing handlebar clamp bolts and measure the length. The measurement is not the overall length but rather from the tip to the base of the head.

This item fits the following BMW bike models:

  • F800GSADV
  • G650GS2011on
  • F650
  • F650ST
  • F650GSTWIN
  • R80GS
  • R100GS
  • R1100GS
  • R1150GS
  • R1150GSADV
  • R1200GS
  • R1200GSADV
  • G650GSSertao
  • TigerExplorer
  • HP2Enduro
  • R1200GSALC
  • R1200GSLC
  • F650GSDAKAR
  • F700GS
  • F650GS
  • F800GS

Customer Reviews

Average Customer Rating: 5 out of 55 out of 55 out of 55 out of 55 out of 5 (Based on 10 reviews)
Already purchased this item? Write a customer review

5 out of 55 out of 55 out of 55 out of 55 out of 5

GS1200

Reviewed by Jim from Seattle, WA (10.20.2014)

Put these on my 2011 GS1200 - worked as advertised. I need to see if they'll fit on the newer Water Boxers, or if I'll need to get a new set.... :)
5 out of 55 out of 55 out of 55 out of 55 out of 5

Handlebar Quick Adjust

Reviewed by Bill Carson from Vancouver, WA (7.18.2014)

These work great. It's nice to be able to adjust your bars quickly, and securely, when switching from pavement to dirt. As always, great product and great service from Wunderlich.
5 out of 55 out of 55 out of 55 out of 55 out of 5

Handlebar quick-adjuster for BMW 1200 GSA

Reviewed by Jens Housley from Portland, Oregon (4.15.2014)

This is a great product, especially if you ride off road a lot with a dual sport bike. It allows you to ride on the pavement, with the handlebars at normal height, and then you can quickly adjust the handlebars for a standing position when you go off-road. I have a BMW 1200 GSA, and it works great for me!
5 out of 55 out of 55 out of 55 out of 55 out of 5

Handlebar Quick Adjust

Reviewed by LPOL from Denver, CO (10.13.2013)

Easy to install. Good quality product. Now...adjust the bars is about a 15 second process. Would buy again...if I had just already done so!
5 out of 55 out of 55 out of 55 out of 55 out of 5

May interfere wuth ROX risers

Reviewed by Antonio Drummond from Brasilia, DF (8.25.2013)

Great product, excellent quality, easy fitment. Will allow you to adjust the bars in a second. I have 2" Rox risers installed, got the 35mm as indicated for my GSA but it is larger than the riser screws it replaces, by around 10mm. It interferes with triple tree screws below, if riser is adjusted at a shallow angle. I avoided the problem by moving the risers to a more upright position, but will probably shave 10mm off the adjuster so I regain full range of adjustment.
5 out of 55 out of 55 out of 55 out of 55 out of 5

I will never go back.

Reviewed by Slyguy from Berkeley, California (3.15.2013)

You can adjust a steering wheel in a car, right? Well you should be able to without tools on a bike. These cinch down tight and don't rattle or move at all. They are easy to adjust, only taking a few seconds. When I hit a dirt road, I love being able to stand up comfortable and be in control.
5 out of 55 out of 55 out of 55 out of 55 out of 5

Very good- just get the right size

Reviewed by Lee from San Diego, CA (1.2.2013)

Originally ordered the 35mm as the site suggests they work with risers. Of course my risers are different (from Touratech), so had to exchange for the 65mm. The only bummer was paying shipping 3 times, but the product is very strong and makes it so much easier to adjust the angle of the handlebars. Worth it!
5 out of 55 out of 55 out of 55 out of 55 out of 5

Handlebar Quick-Adjust

Reviewed by Michael from Carson Valley, NV (8.31.2012)

Good product. Makes optimal positioning of bars for street or dirt an easy, tooless task.
5 out of 55 out of 55 out of 55 out of 55 out of 5

Really transforms the 1200 GS for duelsport operation

Reviewed by Bob Peekq from Wasilla, Ak (9.29.2011)

They're great for being able to get your bars in position for dirt riding
5 out of 55 out of 55 out of 55 out of 55 out of 5

This transforms your dual sport motorcycle.

Reviewed by Mark O. Jensen from Fargo, ND (6.30.2011)

I put these on my Kawasaki KLR with ROX risers. They are outstanding. I can adjust the handlebars for highway and then raise them for standing on the pegs very easily. If you want to stand and have your bars conform to your hands - this is the best way. I now put them on my Triumph Tiger 800 with ROX risers and again am very pleased.