Multi Function Axle Tool
Part Number: 8160238
Availability: In Stock
If you need to remove the front wheel, a 22 mm hexagon socket or a BMW workshop is required. Most tire repair shops don’t have this large hexagon socket, and this size is not a commonly available tool. With this recurring problem in mind, we have designed our own tool that makes changing a wheel possible for a start, and adds many valuable additional functions to your on-board toolkit. Standard ¼” screwdriver bits can be inserted into the hex shaped hole on the end.
• Can be operated using a ratchet and a 17 mm socket, or a round bar (using the side bores in tool body) or if needed in an emergency with a 17 mm wrench.
• 22 mm hexagon head for removing/fitting the front wheel spindle.
• Bit holder with integrated magnet (holds the bit securely in the holder).
• Square head for all 1/2 inch sockets (as ratchet substitute).
• Very strong aluminum, blue anodized.
• Note: Maximum torque of 100 NM/73 ft.-lbs can be applied to the hexagon (but not for the bit insert!)
Tip: add a variety of commonly available ¼” Torx and screw bits and together with the “MultiTool” you’ll have a nearly complete toolkit for roadside repairs, using minimal space.
Not for F800 GS or F650 GS Twin
This item fits the following BMW bike models:
Average Customer Rating: (Based on 13 reviews)
Already purchased this item? Write a customer review
|This tool fits your needs in the event you have to remove the front wheel on the K1600. Its small enough to just put inside your took kit and forget it untill its needed. This tool everyone should have/carry on the K1600GTL/GT|
|Great tool and very fast delivery to Australia|
|Fabricated very well and fully functional ina number of ways. And it's an attracrive little tool as well|
|Used this tool already, nice feel. However, I am sorry I didn\'t purchase the bits with it. Buy the whole set, tool & bits, it\'s small enough to put in the saddle bags.|
|I used it as soon as it arrived to get my RT front wheel off. Worked like a charm. If you're not inclined to make a tool yourself then I would highly recommend this one.|
|I received in short order and it appears well made. I haven't needed to remove my front wheel yet so I haven't tried it out yet. I like the fact that it is small enough to pack in my tool roll so it will always be there when you need it.|
|Used the tool this weekend. Tool work very well but the blue come off bad the 1st time you use it.|
|Worked great easy to use for both off and on,small enough to carry in my tool bag.|
|Bought this to use on on my BMW K1600GTL front axle. due to it's multiple uses, I will be taking it on trips as well. Love it.|
|I own a F800 and they don't have a tool pouch included with the bike, except a screwdriver. This multifonction tool is a great asset to have under the seat! Simplifies my home made tool pouch!|
|Tool quality is exceptional. Ordered and received in a very short time. My first effort at removing the front tire on my 2008 R1200RT and the tool worked perfectly!|
|Great price, perfect size to carry with...|
|This was tmy first tire removal on my RT and the tool made short work of axle removal|