Metric Allen Bolts

When you install a MultiPod to a place where there is an existing bolt, you’ll need a longer bolt than the one you remove. We offer these high quality 8.8 grade bolts and we have them in a wide range of sizes in 5mm increments.

To determine which bolt you need, please note the following:
Begin by removing the bolt where you want to attach your MultiPod and then determine the length. Measure the length from the shoulder to the tip. The image under the More Views tab is an example showing a 55 mm bolt. If the original bolt was recessed, such as the handlebar mounting bolts of an RT, you will want a spacer thick enough to protrude above the surrounding area, so that the base of the MultiPod has a solid foundation.

Knowing the length of the original bolt, add 20 mm for the MultiPod plus the thickness of any spacers that you might also be using to determine the bolt you’ll need.

The price of bolts up to 70 mm is $0.85 each and the price for bolts 75 mm and longer is $1.00 each.

More Views (Click on the images below to enlarge)

55 mm bolt example

This item fits the following BMW bike models: