Sidestand PlatesThere is a Wunderlich side stand enlargement plate available for nearly every BMW motorcycle made since 1988
If we have a side stand enlargement for your model, it will be listed below. Please select your model from the list below and you will be brought to a new page with detailed information and images.
Many BMW motorcycles have a small side stand footprint and can really benefit from one of these side stand enlargement plates. Hot asphalt or soft sand can cause an unsafe situation when parking on the side stand. If your bike tips over it's not only a huge inconvenience, it is an unnecessary expense too. This Wunderlich part solves the problem by increasing the surface area of your side stand foot. It is designed to fit perfectly and be easy to install and that makes this accessory a sensible improvement for your bike.
When installing, apply a drop or two of Loctite or similar thread locking fluid to the retaining screws to ensure that they do not loosen and fall out.
Please find you bike in the list below and click on it for additional information.
This item fits the following BMW bike models:
Average Customer Rating: (Based on 75 reviews)
Already purchased this item? Write a customer review
|The Wunderlich extended foot arrived quickly, and, other than going to this site to watch the video to see the proper placement of my R1220R side stand within the extended foot, everything went very smoothly. This was after I had bought (and returned) an extended foot from another vendor that did not fit properly. I have checked the Wunderlich foot several times and it is still very tight. I did use the blue thread material when installing the screws. The extended foot does not hit the center stand or exhaust when raised. Very satisfied!|
|Great produce, easy to install and certainly expands the foot print of the \"dinky OEM side stand foot\". Can\'t understand why BMW makes such a great bike with a completely undersized sidestand foot! This accessory fixes that problem!|
|Super easy to install, looks great, and really helps reduce the side lean. It interferes a tiny bit when moving the center stand up and down, but just have to make sure it\'s all the way up.|
|Product works well.. provides a bigger landing pad and also a bigger target when putting the kick stand down in your boots|
|Attaches and works as advertised.|
|Absolutely brilliant , if only other of life's little dramas could be fixed as easily with a large foot and a couple of screws.|
|Easy install, nice peace of mind for the bike when asphalt gets hot. It also doesn't look out of place either. Great product.|
|Works as advertised. This is a hard to find piece for the s1000rr. I\'ve had bike stands sink into the pavement down here, and this type of item can save your bike. It really increases the pad size quite a bit, and clears the chain, with plenty of room.|
|A breeze to put on, and feels like it won't come off ever. Tipping over in a sandy parking lot is less likely. Could have more teeth for boot traction though.|
|This is a well built Side Stand Enlarger. Thread loc is a must. If you mark on soft asphalt, gravel or grass this is a must have.|
|Must say I am a tad disappointed; foot size is increased, but I am not happy that the product is rubber-based. I thought it would be a solid substance; time will tell if it wears out too quickly.|
|I get one of these for every bike I've owned. The extra footprint is reassuring. A bit pricey but worth saving a tip-over.|
|The quality and craftmanship are excellent. Easy to follow installation instructions. I now have piece of mind when I use my side stand. Excellent idea.|
|Pretty simple. Works fine.|
|The foot of the BMW side stand only works on very hard surfaces. It is unstable on anything else. This foot enlarger is such an obvious addition to the bike. Especially, if you have tried to balance the bike and struggled to get the accessory pad under the foot. The Side Stand Enlarger is very well made and I look forward to years of worry-free parking.|
|I\'m very satisfied with this product.|
|VERY WELL MADE, INSTALLED IT IN A SNAP. JUST MAKE SURE THAT THE THREAD BLOCKER (LOCTITE OR SIMILAR) IS DRY BEFORE GOING FOR A RIDE. I NOTICED THAT THIGHTENING THE 3 SCREWS IS BETTER TO BE DONE WHILE THE BIKE IS ON THE SIDESTAND (THE WEIGHT OF THE BIKE WILL COMPRESS THE FELT OR RUBBER WASHER AT THE BOTTOM).|
|This product works very well for the 2012 G650GS. It reduces the amount of lean significantly and makes it much easier to get the bike off the side stand for my wife. Easy to install and work as advertised. Highly recommend this product.|
|I think this sidestand enlarger could be larger yet. Description says it doubles surface area of factory stand, but I\'d like to see it even larger. Screws are loose/sloppy fit in the base. The foam pad on the base and a liberal application of Loctite blue gel should keep it in place, but I\'m really disappointed in the sloppy screw fit. I needed this enlarger in a hurry, otherwise I would have returned it and built my own. Admittedly, this one is a lot \"cleaner\" than something I would have built on my own.|
|This is standard kit on my GS and GSA. The serrations make the side stand very easy to deploy, quickly, in technical terrain. The foot is large enough to support the bike in soft conditions. Make sure to use Locktite on the keepers.|