My Cart: 0 item(s)

Instrument/Deflector Reinforcement
    Purchase Instrument/Deflector Reinforcement
    • Part # 8168800
      Instrument/Deflector Reinforcement

    • ★★★★★ ★★★★★
    • $74.95

      Estimated Install
      Time 30 minutes*

    • In Stock
      Caution! Our Instrument/Deflector Reinforcement does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review


    Sign up to be notified when Instrument/Deflector Reinforcement is back in stock!

    We will email you the current E.T.A. for Instrument/Deflector Reinforcement
    Description Instructions Reviews Accessories Bike Fitment

    Description


    Instrument/Deflector Reinforcement

    The instrument cluster and fairing/windscreen are held in place by a plastic bracket. The less than optimal support leads to an annoying movement and vibration of the entire assembly.

    We have designed this reinforcement bracket that stabilizes and eliminates the shaking components. At the same time, this part provides a place to install an additional electrical power outlet or auxiliary light switch or attach a GPS, etc.

    These brackets are made of powder coated stainless steel without sharp edges. The attachment points allow to compensate for possible tolerance variations.

    Tip: This part is advisable for any windscreen that attaches to the original bug screen attachment points. If you have our ERGO-R screen, this part is not absolutely needed.

    Note: If you want to install an additional accessory plug outlet, please see part number 8600670 under the Related Products.



     Wunderlich
     20310-000
    *Installation estimated at 30 minutes for this part may vary depending on skill level.

    Instructions



    Reviews
    Write a review

    Currently Viewing Reviews with a rating of 5. Click here to reset.
    ★★★★★ ★★★★★
    4.89/5 Stars out of 9 Reviews
    5
    8
    4
    1
    3
    0
    2
    0
    1
    0
    Verified Buyer
    pricey but important
    | August 16th, 2019
    bought these in conjunction with a puig windscreen for my F800R to reduce cluster vibration. they work well though the instructions are not super intuitive and you have to be careful when you're installing because the stabilizers latch onto the bike under slight pressure so you need to make sure you don't cross-thread the bolts when screwing them in. overall very useful, subtle, and the accessory ports are really great as well. definitely would recommend getting them if you have a lot of cluster rattle and/or you're considering putting the aftermarket windscreen up (which is 100% worth in on the F800R).
    Verified Buyer
    A must
    | September 17th, 2016
    A necessary reinforcement for that bike. This great product does the job very well.
    Worth it!!
    (lawrence, kansas) | February 8th, 2015
    Got rid of the vibration, totally! Definitely a worthy buy.
    Show All Reviews
    fits well/works well
    (Melbourne , Fl) | April 22nd, 2014
    A little pricey, but works well. A must have if you're installing a sports windscreen over the stock flyscreen . Mine is installed on a '13 BMW F800 R.
    Windshield reinforcement
    (Santa Rosa, CALIFORNIA) | September 17th, 2013
    Great item to support my new Puig windshield on my F800R. The fit is good (although the right side is very close to the brake line, so I moved the brake lever assembly a few millimeters to avoid touching). The Puig is solid with this support but would be a problem waiting to happen without it. I may also be able to take advangage of this to mount a GPS or other item.
    Exelent
    (Monterrey, NL) | August 6th, 2013
    The term vibration with this solution thanks
    Works as advertised
    (Bremerton, WA) | July 31st, 2013
    Solid construction. Holds the instrument cluster and aftermarket windscreen with no vibration from the wind.
    Good Reinforcement!
    (Bend, OR) | February 22nd, 2012
    This is a well-made and Very Easy to Install product. I also like the provision of two mounts for power sockets, as the stock power socket is located far down the right side of the engine, requiring a longish power cord.
    Write Review:
    Instrument/Deflector Reinforcement
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry63678Arq!


    Related & Recommended
    Products






    Bike Fitment


    BMW F800 R

    2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014

    Sign Up For Our Newsletter