Description
Vario Paralever Arm, Ti-Finish
Chassis tuning to a very high standard. This adjustable
Paralever torque arm allows you to adjust the ride height of your motorcycle while simultaneously changing the handling
characteristics of your bike in a very easy and simple
manner. Depending on the setting, the bike becomes a
nimble curve bandit or alternatively a solid and stable
highway tourer. Raising the rear end, steepens the steering angle and results is sharper steering. Lowering the rear end has the opposite effect and makes the bike less twitchy and more stable. Riders seeking to lower their seat height will find that this part can offer enough to make a noticeable difference.
This is done with an easy to operate eccentric adjustment
and laser-engraved setting scales. An eccentric is installed
in the rear attachment point, which can be used to set
the Paralever torque arm within an adjustment range of
14 mm:
- tall (+7 mm): for maximum steering response (steepening the steering angle)
- middle (0 mm): original length (motorcycle height unchanged)
- low (-7 mm): for maximum tracking stability (relaxing the steering angle)
With this part, the original stamped steel strut is replaced and the already unique ParaLever takes on a high tech, yet elegant appearance plus gains in usefulness due to the added adaptability.
A technical eye-catcher with unheard of dynamic properties.
Precision machined from solid aluminum, titanium
anodized torque arm, with blue anodized adjustment
eccentric and laser-engraved scales. With TÜV approval and all required fitting parts. Made
in Germany.
Note: Please see the Installation Instructions for additional information and images.
R1200 S owners please note: This part is not compatible with the optional wide rear wheel.
Wunderlich
26360-003
Please Note: Exceptions to model/year fitment
Model: | Starting: | Ending: | Notes: |
---|---|---|---|
R1200 S | 2006 | 2008 | not with the 6 inch rim |