My Cart: 0 item(s)

Engine Protection Bars, Silver
    Purchase Engine Protection Bars, Silver
    • Part # 8160735
      Engine Protection Bars, Silver

    • ★★★★★ ★★★★★
    • $470.95

      Estimated Install
      Time 45 minutes*

    • In Stock
      Caution! Our Engine Protection Bars, Silver does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review


    Sign up to be notified when Engine Protection Bars, Silver is back in stock!

    We will email you the current E.T.A. for Engine Protection Bars, Silver
    Description Instructions Reviews Video Accessories Bike Fitment

    Description


    Engine Protection Bars, Silver

    With these engine bars, we've applied our extensive experience in Engine Protection Bar design and once again hit a home run. This completely new design, developed especially for the R1200 RT, provides outstanding protection in more ways than one. Not only does it protect the valve covers from damage, it also protects the sump. The engine guard securely mounts at six optimally placed mounting points which share the load and protect from serious damage in most tip over situations. Cornering clearance is not compromised and all routine maintenance can be carried out without the need for removal. Installation is easily carried out with basic tools and no cutting or modification of any type is required. The engine protection bar is available in either a chrome finish or powder coated silver. The bar looks great and integrates perfectly with the RT's design.

    Check out these facts:
    • • Even load distribution
    • • Protects cylinders and fairing
    • • Protects sump and oil filter
    • • Strong mounting system
    • • Removal not required for maintenance
    • • Precision steel construction
    • • Cornering clearance not compromised
    • • Easy to install
    • • No modifications needed
    • • Available in silver or chrome (chrome under Related Products tab)
    Please note the following:
    • These bars are not designed to be compatible with the Original BMW accessory valve cover protectors.


    Please Note: The video for this product shows a bike that also has the saddlebag protection bars installed.



     Wunderlich
     20380-001
    *Installation estimated at 45 minutes for this part may vary depending on skill level.

    Instructions



    Reviews
    Write a review

    ★★★★★ ★★★★★
    4.62/5 Stars out of 39 Reviews
    5
    26
    4
    11
    3
    2
    2
    0
    1
    0
    Pages 1   2   3   4
    engine protection bars R1200RT.
    (Tigard, Oregon) | April 20th, 2015
    The product seems to be well made,except engineers need to reengineer tolerance fit measurements. I had to reshape the under mount by about a 1/4 to 3/8. It was off just enough to not work. One side mount loop that protects the valve covers had to be slightly pressured into place and the set screw had to be replaced. I think I lost it in the fight. That tiny screw should be enlarged to better accommodate the vibration. And why have the screws poin rt ing in two different direction? I suggest red locktite. They already worked loose.
    Great product
    (Salt Lake City, UT) | September 15th, 2014
    Excellent product. I bought both the engine and rear protection bars. I read all of the reviews about installation prior to beginning my project so I was well prepared for the time it takes, having 4 hands instead of two for the project, and the removal of all the plastic. If you're prepared for this, then you won't get stressed out. Just take the project one step at a time and it all goes together quite nicely. I am extremely happy with my bars and wish I had had them at the time I purchased my motorcycle and would have avoided scratching my engine and saddle bags when I tipped over the bike while stopped. But, at least I have them now and haven't tipped over the bike since having the protection.
    Hope I never need them!
    (Mt. Vernon, Il) | August 8th, 2014
    Two factors led to my purchase of the Wunderlich engine protection bars. The one owner 2005BMW r1200rt that I bought was in showroom ready. Secondly, being a short, senior citizen, I was concerned about my adjustment to a taller heavier bike than I was used to riding. I was afraid that the bike might get away from me. The engine and read protection bars were a smart purchase. Additionally, they look good.
    Show All Reviews
    2007 R1200RT engine protection bars
    (Ocala, Florida) | May 25th, 2014
    Nice piece. I like the metallic silver powdercoat finish. Fitment was no problem as long as you leave all fasteners loose until starting the last bolt. Some crash bars I see look out of place, but the Wunderlich bars complement the bikes appearance.
    2011 R1200RT engine bars
    (Centennial, Co) | May 5th, 2014
    The bars were a snap to install, just be sure to install the included installation bolt (about 2 1/2 inches long) from the left side of the Motorcycle! I'm really pleased with the looks and protection that they provide!
    Did it's job well
    (Tucson, AZ) | December 22nd, 2013
    (un)fortunately 2 weeks after having them installed I dropped the motorcycle (BMW RT1200) doing a U turn on a narrow uphill mountain road. Broke the foot rest & scratched the saddlebag but the engine block was unscathed & the mirror frame barely touched. could not have asked for a better protection. The bars did their job well.
    Just like the Big Boys
    (San Diego, CA) | December 4th, 2013
    The bars were securely packaged, and the video online is great. Taking off the plastic was easier than my Suzuki (more screws but easier) The bars seem adequate, I haven't tested them yet. The color(silver) looks good and nearly matches the aluminum finish parts on the bike. I bought both the front and rear bars. Same goes for the rear saddle bag protection...excellent!
    Front protection
    (Olympia, WA) | December 2nd, 2013
    Very much enjoy the look and function of these bars. Relatively easy to install. Dealer liked them because on some the bars need to be removed for access, but not these.
    perfect
    (orange park, fl) | August 11th, 2013
    The bars work perfectly in every way. Had to pay the BMW dealer to install them - I just can't do that kind of work anymore at 70 years young. Even the mechanic was very impressed with them.
    Front tip,over bars
    (Covelo, Calif) | August 9th, 2013
    Well I purchased a set of front and rear protection bars for my new R1200rT after my first accidental drop in the middle of a down hill asphalt road while trying to turn around ,scratched my valve cover and the rear case,,ugle but able to live with it ,well got home put on the front bars on ,not that hard even for and old man under the shade tree ,decided not to put the rear bars on as it required removing the side panel and decided to wait,,bad decision , well the next day heading out the drive way which Is dirt and going down hill ,well had to get off to open the gate get back on go through get off to close the gate, like I said this is on a down hill slope Needless to say I dropped the dam thing again only good thing was it was the same side as before the right side,,,,to make a long story short the front bars worked exactly as they were suppose to ,prevented any more damage to the valve cover but it did sctracked my new bars but the bars worked just fine ,only wish I went ahead and put the rear bars on at the same time,but what the heack the case was already scratched and I still have a clean set of rear bars to install ,,,ha
    Write Review:
    Engine Protection Bars, Silver
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry1731777Arq!


    Product Videos



    Related & Recommended
    Products






    Bike Fitment


    BMW R1200 RT

    2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013

    Sign Up For Our Newsletter