My Cart: 0 item(s)
Description
Instructions
Reviews
Video
Accessories
Bike Fitment
Description
Integrated GPS Mount
With this part you'll be able to place your GPS in plain view and without obscuring any of the instruments or display information. Without the need to make the dangerous move of taking your eyes off the road for more than an instant, even in complicated traffic situations, a quick glance is now possible.
The two existing mounting points that we use to attach the bracket would normally not provide enough support for a GPS unit. Therefore our strong bracket design features a supplemental support that strengthens the mounting points from below, resulting in a rock solid integration.
Other methods of mounting your navigator are often times a compromise, for example there's typically interference with a tank bag or access to the ignition key is hindered.
Some Facts:
• Your GPS is in the optimal field of vision
• Better, safer navigation
• Solid support for your GPS due to elaborate reinforcement
• Easier reach to the screen and GPS controls
• Adjustable: position your GP at any desired angle
• Easy installation with no drilling or other modifications to your bike
• Lightweight, anodized aluminum
• Compatible with most GPS units: TomTom Rider I & II, BMW Navigator, Garmin Zumo, All units that utilize the claw adapter, Any PDA (combined with our Mediabag) Camera, video recorder.......
• Compatible with a Garmin Nüvi 500 series in conjunction with the adapter kit, part number 8600808 (available under the Related Products.
• Complete installation kit with clear instructions
• Made in Germany
Perhaps it's not immediately noticeable, but a great deal of effort was invested in the design and to make this part easy to install.
Wunderlich
21170-000
Important fitment note: For 2010 and later models, part number 8600888 is needed. Available under the Related Products.
Please Note: If you have a Garmin 660, please check the back of the cradle. If the back of the cradle is stepped where the power wire exits, you should additionally order 4 of the rubber mounts that are available under the related products. Alternatively, you can use 4 - 10mm spacers that you may be able to make or acquire locally.
Instructions
Reviews
Write a review
32
5
1
0
0
ERNESTO JR. (Santos, SP) | December 3rd, 2013
I spent a little more and took it to the mechanic to assemble. The result seems to be a genuine factory part. I do recommend.
Jeff Kron (Denver, CO) | October 4th, 2013
This is the perfect mounting for the R1200RT and much preferred over the mirror hole mounting I used before. Easy to mount if you take your time and take care with the installation. A couple tips: Spray painting the 4 mounting screw heads prior to mounting gives a nice factory install look. While the windshield was off and the top panel loose, I traced the GPS wiring through the windshield mount slot and concealed the wire behind the dash for a clean, custom look; then cable-tied the wire to the mounting behind the GPS unit to keep in securely in place. It stays put and there's plenty of room at the top of the track to avoid the wire being pinched. Highly recommended.
Don Sholes (Sioux Falls, SD) | October 1st, 2013
This is an excellent mount for my BMW! The install was a bit of a chore since the two long screws that fasten the supplemental support to the motorcycle hit the back of the speedometer housing which would not allow the holes in the GPS mount itself to line up. I shortened those two screws and it went on perfectly after that. Once installed it's very solid and easily adjustable. I would not hesitate to order another one should the need arise.
Show All Reviews
Product Videos
Related & RecommendedProducts
Popular Products
Bike Fitment
BMW R1200 RT
2005
· 2006
· 2007
· 2008
· 2009