We are very proud to be able to offer the RT version of the Wunderlich engine protection bar range. The challenge to create a set of engine protection bars for the RT almost drove the design and production teams to the brink of insanity. The end product however was worth every hardship encountered. The design brief was to make a protection bar with the same attributes and qualities of the other Wunderlich bars without the need for extensive modifications to the fairing of the RT. The result is a strong (and very pleasing to the eye) component. The bars utilize the trademark Wunderlich shape around the cylinder, the lower tube ends with a stylish upward curve. The lower bracket follows the fairing shape closely and is connected to a massive bracket which is hidden underneath the lower fairing. The bars are connected to the bike at 6 mounting points to evenly spread the load. Oil changes, valve clearance adjustments and all other regular maintenance can be made without removal of the bars. The bars are made of strong steel tubes with a quality chromed finish. Note: Fitting the bars requires minor modifications to the fairing. This is easily done with an electric "Dremel" tool or a normal file. Easy to follow instructions are provided.