wunderlichamerica.com: Handlebar Risers for Navigator

Description Instructions Reviews Video Bike Fitment

Description

Handlebar Risers for Navigator

This version of the R1200 R and RS - LC handlebar risers is supplied with special bolts that allow you to attach your navigator to the bar clamps just as original.

The facts:

Special Navigator bolts are supplied
25 mm height increase
Improved handling
More immediate feel for the ride
Relaxed upright sitting position
More mobility
Individually machined of solid Dural aluminium (not cast)
Anodized silver
Quick and easy conversion - no further changes required
ABE approved

For the R models a raised handlebar is a particularly sensible investment, as the options for handlebar angle increase at the same time which in turn has a positive effect on rider posture. The bars are raised by 25 mm (1 inch) and brought slightly towards the rider. This riser has allowed every R rider who has tried it to find a completely personal setting. ABE approved.

Installation instructions are available above, right. The Additional Information link contains instructions regarding the Navigator Bolts.

Wunderlich
31000-211

Please Note: Exceptions to model/year fitment

Model:	Starting:	Ending:	Notes:
R1200 R	2015	2019	For vehicles with original navigation holder
R1200 RS	2015	2019	For vehicles with original navigation holder
R1250 R	2019	+	For vehicles with original navigation holder

Instructions

Additional Information

Instructions

Reviews

Star (7)
Star (2)
Star(0)
Star (0)
Star (1)

(4.4) 10 Reviews

gc141x

Verified Buyer

10/06/2017

2016 R1200RS

I had these risers installed by a BMW dealer. They're well made- the clutch hose was rerouted at my request. Makes a difference to a 5'7" rider. The colors don't match exactly since the handlebars have a slightly different finish but you only notice this if you stare.

Marcelo Fernandez

Verified Buyer

08/18/2017

Great add on for the RS

I am very pleased with the results after I installed the risers with the Wunderlich Bar conversion High quality built, they look like OEM parts My bike is very comfortable now

D Walborn

Verified Buyer

07/09/2017

Bar risers

Shipping was fast a few days to PA. from CA. Easy to install, take your time and have some extra clutch oil on hand before starting. If you remove the clutch line to reroute it be sure you get 2 o-rings out of the reservoir with the line otherwise the one you forgot will get crushed and it will leak. There changed my ringing position enough to relieve the numbness in my hands. I do wish these would have provided a little offset to the rear though.

Hiroo Shiba

11/21/2016

Easy installation and great results

Having shorter arms, this was a great option to install on my 2016 R1200RS. Installation was simple, even with the optional Garmin navigation. As a precaution, I re-routed the hydraulic clutch line (via youtube example) and that was not difficult at all either. On a road-test to the local post office, the difference was immediately noticeable. The riding position was much more comfortable as my body position became more upright, which is exactly why I bought the risers. Glad to have bought it!

ShooterSteve

11/12/2015

Risers work as expected

The risers were promptly shipped and received in a few days of ordering. Installation took fifteen minutes and went on with no issues at all. The extra 1" rise of the bars up and back has reduced the strain on my back and neck from leaning over too much from the standard bar position.

Bill Lightner

11/02/2015

Great addition. Tough lnstalation.

The risers are a great addition to the R1200R. I am 5'10"" with a 34" shirt arm length. The stock set-up required a forward lean that I didn't care for on the slab. With the risers installed I can now cruise comfortably upright with my hands at the outside of the bar. In twisties my grip goes inboard enabling the fabulous handling for which this bike doesn't get enough credit. Fortunately, I heeded the warning and had the risers installed by my dealer. While the cartoon-like instructions suggest re-routing the clutch line is a simple matter it is NOT. The tech, whom I respect, had to disconnect the line, replace some fluid and flush the system. The install cost more than the parts. I recommend the risers. Just don't think the installation is something you can do on your lunch break.

Richard 230

10/26/2015

One inch make a difference

The Handlebar Risers that I bought were installed on my 2016 RS. They went on very easily in about 15 minutes. The quality of the risers and securing bolts that were supplied seems to match the stock parts. On my bike I did not have to touch the clutch or throttle cables as they had enough slack so that installing the risers did not result in any strain on the cables when turning lock to lock. The additional height that the risers provide makes a noticeable improvement in comfort while riding.

Mike Anderson

09/27/2015

Handlebar Risers for Navigator

I ordered this item almost three months ago, very shortly after buying my 2015 R1200R. The estimate given by Wunderlich was a delivery time of 2-3 weeks. When the kit did not arrive I called to find out why it had not shipped and was told only that there was a further delay and should ship by mid-September. It appears that Wunderlich does not communicate with their customers when there is an availabilty issue. Having had the need for similar products in the past foe BMW's, I researched the availabilty of this product before buying the new R1200R and am disappointed the the lack of service from Wunderlich.

MIke

08/17/2015

R1200RS risers

simple installation much improved reach,unlike the Rt risers it did not change the feel of the front steering, how ever I'm still waiting for the new bolts to fit the Navigation.

Peter Bucy

07/19/2015

A great mod for the 2015 R1200R LC

The risers are well made; installation was fairly easy and the included instructions were created specifically for this motorcycle. After relocating the clutch line and installing the risers, the clutch line and other lines and wiring moved with no restriction or binding. The risers raised the bars 25mm and they pulled back just enough to provide a comfortable, slightly forward-biased riding position. I think that these risers are going to make long distance rides a lot more fun.