My Cart: 0 item(s)

Your Shopping Cart Is Empty
Brake or Gear Lever Enlarger, Rubber
    Purchase Brake or Gear Lever Enlarger, Rubber
    • Part # 8160432
      Brake or Gear Lever Enlarger, Rubber

    • (4.3) 38 Reviews
    • $45.95

    • In Stock
      Caution! Our Brake or Gear Lever Enlarger, Rubber does not fit all bike models. Please select your bike if you are not sure.
      Warning! Important information below in the description.

       
      Write a Review

    Description Reviews Accessories Bike Fitment

    Description


    Rubber Brake/Gear Lever Enlarger

    Depending on which bike you ride, this item can serve as a brake or shift enlargement, or both. Please read the model application list below.

    If you find your shifter or brake lever to be a bit on the small side, this shifter enlargement is the answer. The sleeve fits tightly over the original rubber pad and increases the overall size of the lever. Use a bit of soapy water when sliding the enlargement on. Alternatively, use some clear silicone adhesive. The silicone will act as a lubricant when installing and once it cures, it will ensure that the enlarger stays on.The clear anodized, aluminum enlarger has a factory like appearance and looks sharp and the knurled surface provides a solid grip, even in wet weather. This enlarger is machined of aluminum and anodized. It features three rubber bands that are permanently attached, so it's easy on your boots. We also offer a knurled version as an alternative. Please see the link under the Related Products.


    Please Note: Exceptions to model/year fitment

    Model:Starting:Ending:Notes:
    F650 CS20012005Gear and brake lever enlargement
    F800 GT 2012 2019Gear lever
    F800 R 2009 2011Gear shift lever enlargement
    F800 R 2012 2014Gear shift lever enlargement
    F800 R 2015 2019Gear shift lever enlargement
    F800 S 2006 2010Gear shift lever enlargement
    F800 ST 2006 2012Gear shift lever enlargement
    G310 GS 2017 2019Gear shift lever enlargement
    G310 R 2016 2019Gear shift lever enlargement
    K1100 LT 1991 1999Gear shift lever enlargement
    K1100 RS 1992 1996Gear shift lever enlargement
    K1200 GT 2002 2005Gear shift lever enlargement
    K1200 GT 2006 2009Gear shift lever enlargement
    K1200 LT 1998 2011Gear shift lever enlargement
    K1200 RS 1997 2005Gear shift lever enlargement
    K1300 GT 2009 2011Gear shift lever enlargement
    R850 GS 1998 2000Gear shift lever enlargement
    R850 R 1994 2002Gear shift lever enlargement
    R850 R 2003 2007Gear and brake lever enlargement
    R1100 GS 1994 1999Gear shift lever enlargement
    R1100 R 1994 2001Gear shift lever enlargement
    R1100 RS 1993 2001Gear shift lever enlargement
    R1100 RT 1995 2001Gear shift lever enlargement
    R1100 S 1998 2005Gear shift lever enlargement
    R1150 GS 1999 2004Gear shift lever enlargement
    R1150 GS Adventure 2002 2005Gear shift lever enlargement
    R1150 R 2000 2005Gear and brake lever enlargement
    R1150 R Rockster 2003 2005Gear and brake lever enlargement
    R1150 RS 2001 2004Gear shift lever enlargement
    R1150 RT 2001 2005Gear shift lever enlargement
    R1200 GS 2004 2007Gear shift lever enlargement
    R1200 GS 2008 2009Gear shift lever enlargement
    R1200 GS 2010 2012Gear shift lever enlargement
    R1200 GS 2013 2016Gear shift lever enlargement
    R1200 GS 2017 2018Gear shift lever enlargement
    R1200 GS Adventure 2005 2007Gear shift lever enlargement
    R1200 GS Adventure 2008 2009Gear shift lever enlargement
    R1200 GS Adventure 2010 2013Gear shift lever enlargement
    R1200 GS Adventure 2014 2018Gear shift lever enlargement
    R1200 R 2006 2010Gear and brake lever enlargement
    R1200 R 2011 2014Gear and brake lever enlargement
    R1200 R 2015 2019Gear shift lever enlargement
    R1200 RS 2015 2019Gear shift lever enlargement
    R1200 RT 2005 2009Gear shift lever enlargement
    R1200 RT 2010 2013Gear shift lever enlargement
    R1200 RT 2014 2018Gear shift lever enlargement
    R1200 ST 2005 2008Gear shift lever enlargement
    R1250 GS 2019 2019Gear shift lever enlargement
    R1250 GS Adventure 2019 2019Gear shift lever enlargement
    R1250 R 2019 2019Gear shift lever enlargement
    R nineT 2014 2016Gear and brake lever enlargement
    R nineT 2017 2019Gear and brake lever enlargement
    R nineT Pure 2017 2019Gear and brake lever enlargement
    R nineT Racer 2017 2019Gear and brake lever enlargement
    R nineT Scrambler 2017 2019Gear shift lever enlargement
    R nineT Urban GS 2017 2019Gear shift lever enlargement

    Reviews



    Hal Davis
    Verified Buyer
    09/14/2020
    gear lever enlarger
    Perfect fit and looks great. instant shipping too!


    Aram Gegaregian
    Verified Buyer
    06/03/2019
    Great addition to the shift lever.
    Been using this on my GS now for about a month and really like it. I have not noticed any wear issues on my boots to date. Makes foot movement when shifting feel more natural.


    David McDade
    Verified Buyer
    10/01/2018
    Easier shifting
    Easy to install and gives me a better feel for shiter


    Andrew
    03/16/2017
    They sure to use glue!
    This made a big difference in positive gear changes. I put it all without using any glue and thought it would stick to is it was pretty tough to get on. But after a couple days it fell off, luckily I noticed her right away was able to retrieve it from the middle of the street. I think what happens is after you shift this a certain amount of times, it's going to wear down the rubber on the gear shift lever and will eventually fall off. I just bought some Gorilla Glue it will use that to glue it on and be back in business.


    Jeffrey Kron
    03/03/2017
    Knurled surface ruined toe surface of boots
    Plain and simple - the knurled surface cut up the toe of a nice pair of boots. If your a daily commuter, don't use this product if you care about the boot or show. Tried to smoothen down the knurled surface to no avail - removed it - and through it in a drawer. Very disappointed. Expensive and complete waste of money. This is the only Wunderlich product that disappointed. Do your fan base a favor - go for a ride in some nice boots - then get these out of your product line. $48 down the drain.


    George
    Verified Buyer
    10/02/2016
    GMG
    Great product, very easy to install. Use wetherstrip glue to install and no soap.


    Ira Chavis
    Verified Buyer
    07/19/2016
    Big Fat Shift Lever
    Installed this on my 2014 R1200RTW , my boots seemed like they could not get a good grip on the shift lever while riding. Picked up the Wunderlich shift lever enlarger, install was simple, I did find it took a little bit to push it over the existing lever boot and did put some RTV sealant on as the instructions suggested. I know others said the shift lever had fallen off , but the fit is very tight and had to pull and pull to get it off. Makes shifting a lot easier and effortless.


    M. Makowski
    07/04/2016
    Lost 1st Unit on first trip!
    Worked extremely well w/ my largest Adventure boots. Fell off on first trip - friction fit is NOT enough. Bought another & intend to "through-pin" (brass rod) to the shift lever.


    Tom Anderson
    10/23/2015
    Brake fit? 1600k
    I couldn't get it on the brake. How does one fit it? I put it on the shifter, whet right on. I have. 1600k, 2015. 5 star shifter, nothing so far for the brake.


    Ron Walker
    10/21/2015
    Standard equipment
    I install this extender on every bike I ride. Whenever I mount a ride that doesn't have this part, something feels strange. As soon as I buy a bike, this is the first accessory I order.


    Ray Pearo
    10/19/2015
    Did exactly what I needed it to do
    I had the pegs lowered on my 2014 R1200RT and as a result, the stock gear lever was too high so upshifting meant I needed to lift my foot from the peg, which was awkward and uncomfortable. The gear lever enlarger installed in minutes and has stayed in place; I used silicone adhesive. a screwdriver like you use repair eye glasses will help for tightening the screw. Looks like stock and immediately solved the problem.


    Bob Steinbrunn
    10/01/2015
    Spendy, but high quality and really necessary!
    Once I had bought a pair of proper armored riding boots - even though they were of the low type - I found shifting and braking to be highly problematical. The boots did not fit under the shift lever, even when I adjusted both the pedal portion of the lever and the lever itself on the splines of the shaft. I kept missing the foot brake as well since the boots seemed never to find it. Not particularly safe, is it? What to do? What to do? I was daunted by the price of the shift pedal extension and the brake pedal extension, and it took some time for me to come to the conclusion that I had to have them if I wanted to continue to ride the BMW R1200 RT safely and enjoy it. I bought the shift pedal extension first in order to evaluate the quality, fit, and functionality of it. I'm pleased to say it completely solved my shifting problems. The quality is high, it looks OEM, and I'm pleased with it. It was a bit tricky to install and the directions give you several methods to make this somewhat easier. With that experience in the rear view mirror, I then bought the brake pedal extension. It was also of the same high quality, looks OEM, and was simple to install: about 20 seconds. This, too, solved finding the foot brake with my new boots, and riding is once again a pleasure. To say nothing of being safer. Still, I'm a bit dismayed by the price of each of these items, and I was charged about double what it really cost for shipping via USPS Priority Mail Small Flat Rate Box. Would I buy these again, having said that? Absolutely!


    John Devlin
    07/06/2015
    Shift extension
    Quality design. Very easy installation. Makes shifting a breeze. Strongly recommend.


    Richard Sheridan
    06/12/2015
    2015 R1200GS Shifter
    So far so good. Big improvement over stock. I have big feet and the stock shifter was a bit small.


    Brad
    05/30/2015
    Works with a bit of work
    I received this May 2015. It came with 3 different length set screws, so I don't have to worry about it falling off. A bit difficult to get it all the way on the brake lever, but a nice item.


    David Clark
    04/25/2015
    Modification needed?
    For all the folks who had their extension fall off, why not drill a hole into the extension and use a set screw to secure it to the shifter? Also, it could be fastened using a small hose clamp. I made a similar device for my R1200GS with parts from Lowe's hardware for a few bucks.


    Joe M
    03/28/2015
    Fell off again!
    I purchased the first one, followed instructions, it fell off. I called and another was sent free of charge and this time I used silicone as suggested and guess what- it fell off again. Unfortunate that one pays high dollar for items that are not tested properly. I would add the tank protectors had a similar issue of becoming detached after following instructions. Adhesive should have been tested through temperature ranges.


    Fred Deal
    11/24/2014
    Bigg Deal
    put it on my R9t fit great did use silicone though just to be safe,typical great fit and finish


    David Walton
    07/17/2014
    Rear Foot Brake Lever Extension - R1200RT
    Very nice improvement from the stock peg provided. Just increases the size of the foot peg so your foot can find it in any situation. Also mention during installation to include some Loctite (Med) on set screw to avoid the set screw backing out. Also might want to add clear caulk to the inside shoulder of the lever are to stop water from getting inside.


    shrink
    07/13/2014
    falls off
    I followed the instructions and I liked it until it fell off about 2 weeks later while I was riding. I think the instructions should be clear that glue needs to be used and what type specified.


    Jim C.
    06/07/2014
    Significant Improvement
    I ordered the rubber ribbed shift enlarger because I could sometimes not feel the gear lever with my boot when downshifting. The hardest part of the installation (for me) was placement of the rubber pieces in the three grooves on the enlarger and the 3 rubber O rings on the stock gear shift. A long, thin screwdriver was needed to pry/slide the tight rubber pieces into place. I applied a thin coating of GE Silicone Glue on the gear lever and then lined the inside of the enlarged shifter with the silicone glue. The enlarged shifter slid right into place. I used a G clamp to hold the pieces tight for an hour or so, and then waited 24 hours for the silicione glue to completely set. The following day, the enlarger was bonded to the gear lever. Because the enlarger is wider and longer than the OEM gear lever, I adjusted the gear lever downward so that my boot could easily fit under it. Shifts are now certain and solid, up and down. The enlarger is a significant improvement.


    Peter S. Hesse
    05/31/2014
    I loved this product
    I loved this product on my RT. Unfortunately it fell off. I pushed it on with Soapy water. It went on and I thought, that will probably never stay. Beware self fulfilling prophecies because they come true. This very expensive but excellent improvement must be applied with a silicone adhesive, which I think I read somewhere.


    Louis A. Sousa
    05/09/2014
    Excellent
    I don't understand the difficulty to install. Having read the concerns about it falling off I smeared some silicone adhesive into the enlarger before pushing it on. It slipped on easily and coupled with the three o-rings that install in the recesses of the existing pedal it seems very secure. The silicone has cured and I tried to yank it off and it ain't going anywhere. With the foot peg lower kit this has made shifting so much easier. My gear changes are now much smoother. I got the rubberized version out of expressed concern for boot wear. Good traction on this one. Looks stock. It does not protrude beyond the foot pedal so it does not appear to create concern for scraping when cornering.


    Al Literati
    08/11/2013
    Knurled Brake/Gear lever Extender
    Excellent. Went on easily with soap, and stays put once in place. Just the right extension I was looking for after adding the peg lowering kit for my bike.


    Jim
    08/05/2013
    Gear Lever Enlarger
    Mine fell off, I was lucky I was stopped and someone next to me saw it. I since have glued it on, Hopefully it will stay now.


    Jim
    08/05/2013
    Knurled Gear inlarger
    Mine was easy to install, It seems that it will stay on, as I am unable to turn it at all. I used a bit of dish soap for installation.


    David McCutcheon
    01/25/2013
    gear shifter enlarger
    I like it - it does what you\'d think it would - and does so without any fuss or bother


    David Happ
    11/15/2012
    Gear Lever Enlarger
    I had the same problem that another customer had...The Enlarger fell off soon after being installed. I followed the directions that came with the Enlarger and did not have a real difficult time installing the devise but one week later it fell off on HW 95. I also think the Enlarger is rather expensive for the quality of the product. I hate to write a bad review because Wunderlich normally sells really great products.


    Tim Casey
    10/18/2012
    Good but nothing\'s perfect
    Got the Enlarger when I started missing shifts with a new set of heavier boots. Yes it\'s very hard to get on, I gave up trying to shove it the last quarter inch for fear of damaging the shift lever, but I\'m not missing shifts anymore. Because the round shape adds vertical size to the lever, I have to lift my foot higher to avoid engaging the shifter until I want to, which places a little extra strain on the flexor muscles in my shin, which is mildly fatiguing on long trips. But it accomplishes the main purpose, which was to clean up my shifting.


    exile730 -
    07/29/2012
    great job - well worth it
    easy to fit and makes a huge difference 100% improvement and usual Wunderlich quality


    Jeff Kron
    05/06/2012
    Metal Gear Lever Enlarger
    Retired to the tool drawer after it ruined the toe of every boot worn riding. The cut metal design provides a good grip but is far too harsh on the lever. Mine was removed and tossed into a drawer after efforts to smooth the surface failed. Be warned.


    Ian Russell
    05/01/2012
    Good fit
    Does what it is supposed to do. Fits on easily as per the instructions and has stayed on firmly so far. Improves gear changing precision with my big feet. A keeper.


    Jeffrey Thomas
    04/27/2012
    Work Well
    Combined with a foot peg lowering kit, they work well.


    j.l. smith
    03/19/2012
    Perfect
    New boots and modified shift lever led to shifting problems on my GS, especially when standing up on the pegs. This little $39 jewel solved all that, no more missed shifts whether seated or standing...


    G. Horstkorta
    03/17/2012
    Gear Lever Enlarger
    After reading the product reviews I purchase this item and it works well after installation. The enlarger slipped on with little effort but is not loose. To prevent the enlarger from slipping off, I drilled a small hole at the lever end and safety wired the enlarger to the lever.


    BILL EYRES
    08/25/2011
    Gear lever enlarger
    Worked as advertised.........until it fell off after about a week even tho it had been mounted per instructions. If you like how it works, might want to consider pulling it off and going with some Gorilla Glue or something like it...that should hold it on.


    Jim Gadra
    06/23/2011
    Difficult to Install!
    As the previous review expressed, the shifter enlarger was very difficult to install. I tried soapy water as suggested and worked for some time to install it. After a half dozen or more attempts at removal and reinstallation I still have had limited success. I hope it is on far enough as I lost the previous enlarger for, I suspect, the same reason. Otherwise I think it is a very good product.I would appreciate some feedback from the manufacturer about the installation problem.


    Steve Melnyk
    05/04/2011
    Useful Item; Difficult to Install
    This is a useful addition to the R1200RT. It enlarges the shift lever thus ensuring good shifts. The only problem -- even with soap, this is a difficult product to install. Only defect on a very useful, simple product.




    Related & Recommended
    Products





    Popular Products




    Bike Fitment


    F650 CS

    2001 · 2002 · 2003 · 2004 · 2005

    F800 GT

    2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2019 · 2020

    F800 R

    2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2019 · 2020

    F800 S

    2006 · 2007 · 2008 · 2009 · 2010

    F800 ST

    2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012

    G310 GS

    2017 · 2018 · 2019 · 2020

    G310 R

    2016 · 2017 · 2018 · 2019 · 2020

    K1100 LT

    1991 · 1992 · 1993 · 1994 · 1995 · 1996 · 1997 · 1998 · 1999

    K1100 RS

    1992 · 1993 · 1994 · 1995 · 1996

    K1200 GT

    2002 · 2003 · 2004 · 2005 · 2006 · 2007 · 2008 · 2009

    K1200 LT

    1998 · 1999 · 2000 · 2001 · 2002 · 2003 · 2004 · 2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011

    K1200 RS

    1997 · 1998 · 1999 · 2000 · 2001 · 2002 · 2003 · 2004 · 2005

    K1300 GT

    2009 · 2010 · 2011

    R850 GS

    1998 · 1999 · 2000

    R850 R

    1994 · 1995 · 1996 · 1997 · 1998 · 1999 · 2000 · 2001 · 2002 · 2003 · 2004 · 2005 · 2006 · 2007

    R1100 GS

    1994 · 1995 · 1996 · 1997 · 1998 · 1999

    R1100 R

    1994 · 1995 · 1996 · 1997 · 1998 · 1999 · 2000 · 2001

    R1100 RS

    1993 · 1994 · 1995 · 1996 · 1997 · 1998 · 1999 · 2000 · 2001

    R1100 RT

    1995 · 1996 · 1997 · 1998 · 1999 · 2000 · 2001

    R1100 S

    1998 · 1999 · 2000 · 2001 · 2002 · 2003 · 2004 · 2005

    R1150 GS

    1999 · 2000 · 2001 · 2002 · 2003 · 2004

    R1150 GS Adventure

    2002 · 2003 · 2004 · 2005

    R1150 R

    2000 · 2001 · 2002 · 2003 · 2004 · 2005

    R1150 R Rockster

    2003 · 2004 · 2005

    R1150 RS

    2001 · 2002 · 2003 · 2004

    R1150 RT

    2001 · 2002 · 2003 · 2004 · 2005

    R1200 GS

    2004 · 2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018

    R1200 GS Adventure

    2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2014 · 2015 · 2016 · 2017 · 2018

    R1200 R

    2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2019 · 2015 · 2016 · 2017 · 2018 · 2019

    R1200 RS

    2015 · 2015 · 2016 · 2017 · 2018 · 2019 · 2016 · 2017 · 2018 · 2019

    R1200 RT

    2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018

    R1200 ST

    2005 · 2006 · 2007 · 2008

    R1250 GS

    2019 · 2019 · 2020 · 2020 · 2021

    R1250 GS Adventure

    2019 · 2019 · 2020 · 2020 · 2021

    R1250 R

    2019 · 2019 · 2020 · 2020 · 2020

    R1250 RT

    2019 · 2019 · 2020 · 2020

    R nineT

    2014 · 2015 · 2016 · 2017 · 2018 · 2019 · 2020

    R nineT Pure

    2017 · 2018 · 2019 · 2020

    R nineT Racer

    2017 · 2018 · 2019 · 2020

    R nineT Scrambler

    2017 · 2018 · 2019 · 2020

    R nineT Urban GS

    2017 · 2018 · 2019 · 2020

    K1600 Bagger

    2017 · 2018 · 2019 · 2020 · 2021

    K1600 Grand America

    2018 · 2019 · 2020 · 2021

    K1600 GT

    2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2019 · 2020

    K1600 GTL

    2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2019 · 2020 · 2021

    R1250 RS

    2019 · 2019 · 2020 · 2020 · 2021

    S1000 XR

    2015 · 2016 · 2017 · 2018 · 2019

    Sign Up For Our Newsletter






    This website uses cookies to identify visitors, track visitors to our website, store login session information and to remember your user preferences. By continuing to use this site you agree to our use of cookies. Learn More.

    This website uses cookies. By continuing to use this site you agree to our use of cookies. Learn More.

    Accept