FERTAN - Cavity Wax 16oz spray
FERTAN Wax Cavity Protection has been developed for the preservation of wax-based motorcycle cavities:
- For the pre-treatment of cavities, rust should always be removed first with the product FERTAN Rust Converter to remove existing corrosion.
FERTAN Cavity Protection Wax
meets the high requirements of the automotive and motorcycle industries
for cavity protection, also with regard to processing and environmental
- After application, the product forms a transparent layer which is
only dry on the surface and provides excellent and long-lasting
protection against rust and corrosion.
Finally, protect permanently with FERTAN Cavity Protection Wax. The
homogeneous protective layer of the wax remains elastic for years, small
cracks, e.g. due to body twisting, close automatically and the optimum
protection is permanently maintained. There is no dissolution or
detachment of the protective layer, e.g. by solvents or cleaning agents.
- Protective wax with resin component
- Extremely creep resistant
- Extreme corrosion protection
Note: After derusting and before the application
of Cavity Protection Wax, pre-treat the weld seams and sheet metal
overlaps with a layer of PREWAX Pre-treatment Wax, a seam penetrating
protective wax with extreme creeping properties. Then apply cavity
protection wax in several thin layers, staggered by 12-48 hours to
compensate for shrinkage cracks.
Please Note: Cannot be shipped outside of the United States