LIQUI MOLY engine flush is nothing short of an elixir of life for an engine. We recommend using this product with every oil change! Engine Flush makes the old motor oil sheet off of the internal castings and passages, ensuring that all residues are carried out with the draining hot oil.
Before changing your oil, ride the motorcycle to bring it up to full operating temperature. Pour the entire contents of the can into the motor and then restart and let the motor idle for 10 minutes, allowing the engine flush to fully circulate and mix in with the oil. Deposits and residues will drain out much more efficiently than would be the case without using Engine Flush and the result is a much cleaner engine, free of contaminants. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics.
One 250 ml can is sufficient for up to 4.5 liters of oil. Add Motorbike Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Motorbike Engine Flush is compatible with all commercially available motor oils. Also suitable for use on motorcycles with wet clutches.
Please Note: Cannot be shipped outside of the United States