Part # 8500927
Side Stand Enlarger (Low Suspension Models)
FOR LOW SUSPENSION MODELS

Side Stand Enlarger - Low Suspension Models

We have been offering side stand enlargers for BMW motorcycles for many years and we offer model specific enlargers for nearly every model since 1994. Our design is simple, easy to install and time tested. The side stand enlarger is made of machined anodized aluminum and it features a serrated edge to provide a better grip when deploying the stand.

Considering the weight of the F 650 | 700 GS Twin, the original side stand plate at roughly 2” x 2” is on the small side to offer secure support, especially when parking on loose ground or hot asphalt. Our side stand enlarger increases the surface area by approximately 50% and provides the needed support and peace of mind. The part is precisely shaped so that there is no interference with any other part of the bike and it is also visually unobtrusive.

The three clamping screws hold the enlarger firmly in place with no drilling or other modifications needed. Be sure to place a few drops of thread locking fluid on the screws to avoid them backing out and the part falling off.

Details

• Surface area increased by more than 100%
• Safe support for the machine on all surfaces
• Cut-out for original foot lined with vibration-absorbing foam rubber
• Rust protection for the original stand plate
• 8 mm thick, high-strength aluminum
• Rustproof anodized black
• CNC machined
• Easy to fit

Note: Please see the Related Products for the optional Spike Set. The spikes not only offer additional grip with the ground, they also add some height which can reduce the amount of lean angle.