LIQUI MOLY Motorbike Fuel Stabilizer - 250ml
If you are not able to ride your bike on a regular basis, or if you have several bikes, you can't ride them all at once. In any event, your bike may sit idle for longer than you like and modern fuel will deteriorate and cause problems that compromise optimal performance. This fuel stabilizer will help ensure that your bike is ready to go when you are. We recommend adding the stabilizer initially to condition the fuel and then at every fill-up on seldom ridden bikes or at the last fill-up when you anticipate that the bike may not be ridden for a while.
Liqui Moly Fuel Stabilizer preserves and protects fuel against aging and oxidation. Prevents corrosion throughout the entire fuel system. Prevents problems from occurring when any 2 or 4 stroke motor decommissioned or not run on a regular basis. The product Increases operational reliability and has a lasting effect.
- Protects fuel against oxidation and aging.
- Increases operational reliability.
- Cost-effective due to exact dosage.
- Easy-to-use thanks to dispensing bottle.
- Long term action.
- Tested on engines with catalytic converters.
Suitable for all 4-stroke and 2-stroke gasoline engines - especially for preventive care. Tested for turbochargers and catalytic converters.
Add to the tank when fueling. Filling the dosage chamber (25ml) once is sufficient for 5 liters (1.25 Gallons) of fuel. Basically, add about half a bottle to a full tank on most motorcycles. Also suitable for long-term use in seldom used engines, for example garden equipment, pressure washers, etc. Before putting into storage, add the appropriate amount to a full tank and run the engine for approximately 10 minutes.
Please Note: Cannot be shipped outside of the United States
- Suitable for all 4-stroke and 2-stroke gasoline engines