My Cart: 0 item(s)

Bar Riser, 20mm
    Purchase Bar Riser, 20mm
    • Part # 8500138
      Bar Riser, 20mm

    • ★★★★★ ★★★★★
    • $74.95

      Estimated Install
      Time 30 minutes*

    • In Stock
      Caution! Our Bar Riser, 20mm does not fit all bike models. Please select your bike if you are not sure.


    Write a Review

    Sign up to be notified when Bar Riser, 20mm is back in stock!

    We will email you the current E.T.A. for Bar Riser, 20mm
    Description Instructions Reviews Bike Fitment


    Bar Riser, 20mm

    A small, almost un-noticeable change - but with a big effect!

    The Facts:

    • 20 mm (3/4") higher.
    • Improved handling.
    • Relaxed and upright seating position.
    • Off-road riding while standing up is now much easier = better control, less tiring.
    • No modification to bike needed.
    • Precision machined from solid high quality aluminum alloy (not cast).
    • Anodized silver.
    • Sold complete with all parts needed.
    • TÜV approved.

    This part will improve the riding "feel" and seating comfort of the GS. The bike feels lighter and more agile. The added height allows more adjustment to the handle bar angle, which helps to find the best seating position. Fitting is easy and can be performed within minutes. Sold complete with everything needed for an easy installation.

    *Installation estimated at 30 minutes for this part may vary depending on skill level.


    Write a review

    ★★★★★ ★★★★★
    4.92/5 Stars out of 13 Reviews
    Pages 1   2
    20mm bar risers BMW F700GS
    | March 9th, 2019
    I originally purchased a pair of ROX risers that insert in the existing bar location and raise the bars up around an inch. I swapped them out when I installed a GPS holder that didn't allow the ROX risers to still fit. These bar risers work fine, and look better, in my opinion than the ROX. They look factory installed. Tight quarters for the install, just be sure to use a towel or something to protect the bike as you lay the bars down and remove/reinstall the existing mounts. And be sure to keep your tools within arms reach, including the odd 16mm socket it takes to hold the nut underneath the triple tree.
    Verified Buyer
    20mm makes a massive difference.
    | May 27th, 2017
    20mm is a big improvement. It's the perfect height now for better comfort and much better control which is kinda hard to believe as the BMW F 700 GS out handles everything in tight twisty roads, standing up is much improved, I'm 6'3. You could go higher but it will dramatically change the steering to be more twitchy. My F7 out handles my 2015 S1000RR even better now in the super tight mountain roads.. Love this product, fit is perfect and you just can't beat the quaility. Awesome cheap mod, just take your time doing it getting it all aligned and make sure the rubber gromets underneath don't fall out. Oh and don't cut your GPS cable in half while tightening the bars back up with the curved washer underneath the triple tree. yeah lol. love this product.
    Verified Buyer
    Bar riser,20mm
    | April 1st, 2017
    be ready to spend little time getting the handlebar clamps off and risers properly installed. Space is tight, and getting the right allen and socket wrench is essential. Once on it added a lot specially with my low seat, an addition worth the effort
    Show All Reviews
    Makes a difference
    (Kittery Point, Maine) | August 23rd, 2015
    20mm may not seem like a lot but these made a real difference and a more comfortable riding position. I am 5'11" with a 32" sleeve.
    (Portage , MI) | August 14th, 2015
    This small but very important item makes riding the BMW much more enjoyable ! Thanks for a great product and shipping 🏁
    Much better ergonomics
    (Portland, OR) | January 9th, 2015
    Less stress on my shoulders and neck with more upright and relaxed position. Brought bars up and back so I'm not leaned forward. I'm about 5'9" with avg reach, but found stock F700 had me leaning forward and had to bend my neck up. This is more natural riding position.
    Very nice ergonomic upgrade
    (Aloha, OR) | April 30th, 2013
    The risers were easy to install, and provided very nice ergonomic improvement for me. (I\'d recommend looking at the Wunderlich footpegs, too - they lower the foot position slightly w/o decreasing ground clearance.) The combination allows confident stand-up riding. The only thing I\'d change is the top chamfer of the risers - their fit was not 100% \"snug\" in the base of the stock handlebar clamps, but they tightened down to torque-spec just fine.
    Bar Riser, 20mm
    (Carson Valley, NV) | August 31st, 2012
    Product as advertised. Easy install. Only improvement I\'d like to see is the replacement bolt head match the same type as what is on the stock bike (Star, not Hex). One less tool to worry about.
    20mm Handler Bar Risers
    (chandler, az) | August 17th, 2012
    These installed just as advertised - quick and simple. <a href="" target="_blank">Click here to see my video for more information</a>
    Bar riser
    (HHI, SC) | April 26th, 2012
    It works and installs as advertised.
    Write Review:
    Bar Riser, 20mm
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry13178Arq!

    Bike Fitment

    BMW F650 GS Twin

    2008 · 2009 · 2010 · 2011 · 2012

    BMW F700 GS

    2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018

    BMW F800 GS

    2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018

    BMW F800 GS Adventure

    2013 · 2014 · 2015 · 2016 · 2017 · 2018

    Sign Up For Our Newsletter