Description Reviews Video Bike Fitment

Description

Mirror, Black Left or Right

Sold individually: Can be used on the left or right side.

These mirrors are identical replacements for the originals, made by the original supplier to BMW. If your mirror is damaged, the mirror glass is loose or the stem is starting to rust, these mirrors are available as a reasonably priced alternative to the rather expensive Original BMW replacement mirror.

These mirrors even include the special nut that is needed to attach the mirrors and that makes them ideal as a retrofit mirror on R1150 RT and R1200 RT models. Left and right are the same, so if you need a set, please order two.

Here is a cost effective and simple solution: Install a pair of these mirrors on your RT and use them for a clear, unobstructed view of what's behind. You can then also adjust the original mirrors slightly more outward than you normally would, to see what's in the lane beside without having to turn and look. A win win situation.

The controls of the RT are technically the same as those used on other models (such as the various models listed above) and so they already have a built-in attachment point for mirrors.

Installation is simple and will take only a few minutes.
Special nut is included
Made in Germany
Sold each

The R1200 RT can greatly benefit from the installation of these mirrors! Though the original mirrors are well placed to provide wind protection, they are not in the optimal spot for a clear view of what's behind and especially if you are traveling with luggage on the rear.

R1200 RT up to 2009:

If you have a large aftermarket windshield, these mirrors may not work for you because the mirrors may contact your windshield when the handlebars are turned fully. We have not tested compatibility with the many aftermarket shields available.
The upper holes in the controls may be a bit too small for these mirrors to fit. In this case, a round file, Dremel Tool or a rolled up piece of sandpaper can be used to slightly enlarge the upper hole, and the mirror will slide right in. This is not a defect of the mirrors, in some cases this extra machining process was omitted on the RT by the factory because it was not foreseen to install mirrors in the control assemblies on the RT.

Reviews
Write a review

★★★★★ ★★★★★

4.57/5 Stars out of 47 Reviews

Write a Review

5 ★

4 ★

3 ★

2 ★

1 ★

Pages 1 2 3 4 5

Verified Buyer

Perfect match and fit

★ ★ ★ ★ ★

Lobstah and buttah | April 17th, 2020

The title says it all. Fitment to my 2002 R1150R was perfect. Just like an OEM mirror in style and fit. Quick delivery as well. All around, a great experience.

Verified Buyer

Black Mirrors for 2007 R1200RT

★ ★ ★ ★ ★

Gregory Kunz | July 4th, 2019

I purchased the mirrors for my 2007 R1200RT. They were delivered in the scheduled time and well wrapped. The installation was easy and fast. The right mirror fit as a factory part and a small amount of sanding was needed on the left control bar. They greatly improved my backward vision in the area of the road behind the bike. That area has alway been a blind spot with the original BMW mirrors. As suggested I adjusted the four mirrors to covered my full side and back field of vision. This wast the best safety improvement I made for the bike. I highly recommend this produce for any 2007 R12RT.

Verified Buyer

A very safe addition to my RT

★ ★ ★ ★ ★

Eddie | September 16th, 2018

The 2 mirrors arrived well protected and with a little, very little, filing on the left, clutch side, the mirrors attached as if from the factory. I ride two-up and the view is so much better now with this addition. A very well made mirror and we will see haw long they keep giving me a safe and needed view of the road behind! Thanks for a great solution.

Show All Reviews

Verified Buyer

Same here

★ ★ ★ ★

Steve | September 2nd, 2018

Just as most have said, the left side mount needs a little filing to get the mirror in, and they fit well with the custom nuts. I have vibration in both mirrors, but that is not the fault of the product. Would like to know if anyone has had any luck cutting down on the vibration by adding lead shot???

High value upgrade for my 2008 R1200RT

★ ★ ★ ★ ★

Don Stauffer | August 20th, 2018

I knew the stock mirrors in the fairing were not the greatest, but after I mounted a pair of the Wunderlich mirrors, I realized they were downright dangerous! Traveling two up with a BMW soft bag on the back, there is almost zero visibility with the stock mirrors. The Wunderlich mirrors were a perfect fit, drilling out the left side a bit was necessary as indicated, but took about 60 seconds. The mirrors look great on the bike, clear the windscreen and tank bag, and were half the cost of OEM mirrors that I priced. Highly recommended.

Verified Buyer

Left or Right Mirrors for a 2009 R1200RT

★ ★ ★ ★ ★

Jim | September 23rd, 2017

Mirrors are constructed of heavy grade material and really give you a great rear view. Holes in the handle bars appear to have small burrs that need to be sanded off. I used a dremel type tool and it took less than a minute for a perfect fit. A rolled up piece of sandpaper would probably achieve the same result.

Verified Buyer

Mirrors

★ ★ ★ ★ ★

Jeff | August 21st, 2017

These mirrors fit my bike without any issues. Received them in a timely manner, and would recommend them. Overall this is a great product.

Verified Buyer

mirror

★ ★ ★ ★ ★

Bob Q | November 21st, 2016

Great product - matched the original on the left side. Now I am complete.

Why did it take me so long?

★ ★ ★ ★

Pilote (Kalispell, MT) | September 16th, 2015

My bike is a 2004 BMW R1150RT. I have always been aware of the holes in the control assemblies that were obviously meant for additional mirrors but nobody ever seemed to carry compatible units in stock. As I was preparing for a 3 week tour with my wife I decided that it was time to do some research. I found these and, after reading the reviews, decided to give them a try. I had read about some issues with fit and was expecting to have to modify the holes to get these installed. Though they both fit fine into the existing holes, the right side switchgear required a small amount of filing of the plastic on the bottom to allow a straight-on mounting of the nut and washer. Once that was done I attached a piece of masking tape to hold the washer and nut on the allen wrench so I could reach up into the housing to start the nut. It grabbed relatively easily and I tightened it down snugly. I saw the recommendation to use Loctite so I did put that on prior to the assembly. The left mirror nut access was a piece of cake. I adjusted their position to suit my preferences but found out later that when my electrically adjusted windshield is in the low position and I am making a tight maneuver, they will contact. No big deal, I just need to remember that. We have put 1500+ miles on the bike since these were installed and neither of them has loosened in the least. I use these almost exclusively now and rarely look at the stock mirrors anymore. They are a bit less clear than the stock ones but are mounted in such a way that I can actually see the traffic around and behind me. They do what I wanted them to do and I couldn't be happier. I'm very glad I bought them!

Well Worth the Money!

★ ★ ★ ★ ★

Richard Samuels (Vancouver, WA) | May 9th, 2015

Recently purchased a 2009RT. Love the bike but had some serious lane changing concerns. Purchased tow mirrors and had them installed in 10 min. Great sense of security now that a major visibility problem has been solved. I'm also impressed with the quality of the product - very well built. Finally, I appreciated the on time delivery of the product. Nice job!