Verified Buyer
Black Mirrors for 2007 R1200RT
★
★
★
★
★
Gregory Kunz | July 4th, 2019
I purchased the mirrors for my 2007 R1200RT. They were delivered in the scheduled time and well wrapped. The installation was easy and fast. The right mirror fit as a factory part and a small amount of sanding was needed on the left control bar. They greatly improved my backward vision in the area of the road behind the bike. That area has alway been a blind spot with the original BMW mirrors. As suggested I adjusted the four mirrors to covered my full side and back field of vision. This wast the best safety improvement I made for the bike. I highly recommend this produce for any 2007 R12RT.
Verified Buyer
A very safe addition to my RT
★
★
★
★
★
Eddie | September 16th, 2018
The 2 mirrors arrived well protected and with a little, very little, filing on the left, clutch side, the mirrors attached as if from the factory. I ride two-up and the view is so much better now with this addition. A very well made mirror and we will see haw long they keep giving me a safe and needed view of the road behind! Thanks for a great solution.
High value upgrade for my 2008 R1200RT
★
★
★
★
★
Don Stauffer | August 20th, 2018
I knew the stock mirrors in the fairing were not the greatest, but after I mounted a pair of the Wunderlich mirrors, I realized they were downright dangerous! Traveling two up with a BMW soft bag on the back, there is almost zero visibility with the stock mirrors. The Wunderlich mirrors were a perfect fit, drilling out the left side a bit was necessary as indicated, but took about 60 seconds. The mirrors look great on the bike, clear the windscreen and tank bag, and were half the cost of OEM mirrors that I priced. Highly recommended.
Verified Buyer
Left or Right Mirrors for a 2009 R1200RT
★
★
★
★
★
Jim | September 23rd, 2017
Mirrors are constructed of heavy grade material and really give you a great rear view. Holes in the handle bars appear to have small burrs that need to be sanded off. I used a dremel type tool and it took less than a minute for a perfect fit. A rolled up piece of sandpaper would probably achieve the same result.
Verified Buyer
Mirrors
★
★
★
★
★
Jeff | August 21st, 2017
These mirrors fit my bike without any issues. Received them in a timely manner, and would recommend them. Overall this is a great product.
Verified Buyer
mirror
★
★
★
★
★
Bob Q | November 21st, 2016
Great product - matched the original on the left side. Now I am complete.
Well Worth the Money!
★
★
★
★
★
Richard Samuels (Vancouver, WA) | May 9th, 2015
Recently purchased a 2009RT. Love the bike but had some serious lane changing concerns. Purchased tow mirrors and had them installed in 10 min. Great sense of security now that a major visibility problem has been solved. I'm also impressed with the quality of the product - very well built. Finally, I appreciated the on time delivery of the product. Nice job!
Mirrow for bmw k1200lt
★
★
★
★
★
Ben Quinn (Glasgow, Ky) | April 16th, 2015
This product worked great in the blank stem mirror holes on my BMW K 1200 LT. The OEM mirroors are to low and cuts out a lot of site.
Works great on 2005 1200RT
★
★
★
★
★
Ron Havens (Springfield , IL) | July 12th, 2014
These fit the available holes in the RT handlebars quite well, although the bottom holes do need to be enlarged slightly. I needed to use some Shoe Goo glue to hold them in place after I got the stems in the right position because even a slight bump was enough to move them out of alignment, i just could not get the nut tight enough to do the job well. I LOVE these mirrors and almost never even glance at the original mirrors, these give a great view to the rear and side, just as effective as the ones on my GS.
I see you back there
★
★
★
★
★
Michael Howard (La Grande, OR) | March 18th, 2014
I can finally see what's behind me without bending my head over and pulling in my elbow. I ride with the top case all the time and it usually blocked half of my view. These are great and now I dont know how I got along without them. Had the same problem a few others reported with one of the holes being to small. Wrapped some sandpaper around a small dowel and in a couple minutes it was fine. Very small amount of vibration above about 65 but not enough to blur the traffic. Maybe couldn't read a license plate but that was about it I definitely recommend these