Description
Ohlins - Rear Shock, Low
Important ordering information: When you order Ohlins suspension from Wunderlich America, you will not be receiving an off the shelf product. Each shock absorber will be especially built just for you by Ohlins factory trained technicians, based on the information that you provide. The modular construction system and the world-wide cooperation between Ohlins and Wunderlich make this possible.
Answering all of the questions above will allow us to select the proper components in assembling your shock absorber. If needed, You will be able to provide additional information in the comments section later on in the checkout process.
Please enter your body weight without gear and specify Pounds or Kilograms.
Ohlins Shock Absorber Type S46 DR1S "Low" version Rear
This shock absorber is 8mm shorter than the standard length BM436 and it features a remote spring pre-load adjuster. This makes it easy to make adjustments to the ride height without tools, handy if you often ride with different loads. Within this shock absorber lies a sensational feature: The damper is a single tube design with a 46 mm piston. This monotube high pressure gas type shock absorber with an integral gas reservoir in the main body is loaded with performance. Unlike other shocks that do not have an exterior reservoir, this is not a standard emulsion type shock absorber.
There is simply no comparison between the Ohlins suspension and the stock suspension. The radical improvement will be immediately noticeable and your BMW will become the ultimate fun machine.
The wide range, step-less preload adjustment combined with widely adjustable rebound damping allow Any rider to find the ideal settings for all loads and road conditions.
The facts
- Ohlins quality and performance
- Ohlins finishes and design, developed with racing experience
- Single tube damper with 46 mm diameter, Teflon guided piston
- Adjustable rebound and compression damping in one adjustment
- Remote hydraulic spring preload adjustment
- Custom built to your specifications
- 30 click damping adjustment
- Completely rebuildable and serviceable
- Maintenance free pivot bearings
- Made in Sweden, assembled in USA
The Ohlins modular construction system makes it possible to completely disassemble the shock for routine servicing and repairs. Should servicing become necessary, you will have like new performance restored and for this reason, the shock will certainly last for the lifetime of the motorcycle.