My Cart: 0 item(s)

Your Shopping Cart Is Empty
Brake Lever Enlarger
    Purchase Brake Lever Enlarger
    • Part # 8160169
      Brake Lever Enlarger

    • (4.8) 18 Reviews
    • $44.95

      Estimated Install
      Time 10 minutes*

    • In Stock
      Ships Today!
      Order within the next 0.00.00
      Caution! Our Brake Lever Enlarger does not fit all bike models. Please select your bike if you are not sure.
      Warning! Important information below in the description.


    Write a Review

    Sign up to be notified when Brake Lever Enlarger is back in stock!

    We will email you the current E.T.A. for Brake Lever Enlarger
    Description Instructions Reviews Bike Fitment


    Brake Lever Enlarger

    For those riders who find the rear brake lever to be a bit small, here is the answer. This enlargement is shaped just like the original, complete with the angled end. It just slips over the pedal of the brake lever and is held in place with a set screw. No modifications are needed. The part is made of aluminum, knurled for a good grip and clear anodized, closely matching the finish of the lever. When installed, it looks like it belongs there.


    Please Note: Exceptions to model/year fitment

    HP2 Enduro20052008Gear shift lever enlargement
    HP2 Megamoto20062009Gear shift lever enlargement
    K1100 LT19911999Brake lever enlargement
    K1200 GT20022005Brake lever enlargement
    K1200 RS19972005Brake lever enlargement
    R850 R19942002Brake lever enlargement
    R1100 R19942001Brake lever enlargement
    R1100 RS19932001Brake lever enlargement
    R1100 RT19952001Brake lever enlargement
    R1150 RT20012005Brake lever enlargement
    R1200 RT20052009Brake lever enlargement
    R1200 RT20102013Brake lever enlargement

    *Installation estimated at 10 minutes for this part may vary depending on skill level.



    Hal Davis
    Verified Buyer
    brake enlarger
    Love it. Perfect size and fits like a glove. And looks like OME

    Verified Buyer
    Excellent Product
    Pricey, but safety comes first. I was slipping off the brake pedal too often. This enlarger performs as expected. Installed in a few minutes. A 2 mm hex wrench and a little blue Loctite is all that was required. At last I can find the brake lever reliably.

    Verified Buyer
    brake lever enlarger
    The price is exorbitant; similar items are available on-line for 40% of the price. The allen/set screw is way too small to hold securely, doesn't even go into the groove on the original pedal. Worst, the instructions do not say what size Allen wrench to use. All-in-all, most disappointing.

    David Witmer
    Great product
    Thanks to this item, I can finally find the brake lever. you wont be disappointed.

    Keith Diehl
    dead simple to install, looks good & makes controlling the rear brake much easier.

    Tony C.
    Went with the crowd and was not disappointed...
    I too needed to enlarge the rather diminutive rear brake and found the reviews for this product to be quite positive. As everyone has stated, it was truly easy to install and matches the cosmetics of the RT. I have already recommended this part to some of my friends and they may soon add it to their bikes as well.

    Perry Hebard
    Most important accesory!
    This simple , well made brake pedal extender is vital to safe performance of my R1200rt. Price was acceptable. Dont leave home without it!

    Gene M.
    Perfect fit, looks like original equipment, works great!
    I needed a larger brake pedal on my RT and this appeared to be the best one. I received it quickly and it took about 1 minute to put it on. It works perfectly as it allows my foot to naturally hit the brake rather than having to adjust my toe inward. It is about 2 1/4 inches long and 3/4 inch around. Sounds big, but it is perfect. I only knocked down one star because the price is very high and the shipping charges are absurd. But I would buy it again in a minute!

    Works great, looks like it belongs
    This part definitely makes it easier to use the rear brake. Prior to its purchase, finding the rear brake pedal was challenging. With the addition of it, the brake is easy to find and use without looking out of place or causing issues. Highly recommended.

    Does just waht I wanted
    Nicely manufactured product that did exactly what I was looking for and was easy to install. Extending the brake lever made it much easier to use the brake lever and also relieved some tension on my knee that had cropped up once I lowered the pegs. I no longer have to turn my foot inward to confidently apply the rear brake. (I also used a little blue Locktite for peace of mind.)

    Great Brake Lever
    I chose this brake lever over similar ones that require drilling of the original bike brake lever. I wasn't disappointed with the quality or installation. I did use Loctite Blue on the set screw to minimize the likelihood of it vibrating loose over time. Installation only takes minutes. Great product!

    Well-made and fairly priced
    This part extends the extremely short brake pedal out far enough to make it east to locate and usable. Couldn't be easier to install. A nicely finished part at a good price.

    Bob in MI
    Larger Lever
    Went on in a zip. Tightened set screw with medium threadlocker. Solid braking surface. Looks good, matching aluminum on R1200RT.

    G. Horstkorta
    Brake Lever Enlarger
    Works as advertised, good investment. To prevent the product from coming off the stock lever I drilled a small hole in the enlarger near the brake lever end and safety wired the enlarger to the lever.

    Brake level enlarger
    It's safer - don't have to "feel" for the brake lever with your boot.

    Mal Clingan
    Brake Lever Enlarger
    I am extremely satisfied with the quality of the product and the promptness of Wunderlich. This part was machined beautifully and is a snap to install on my BMW R1200RT. I have much more confidence when I hit the brake pedal with my foot now.

    Well, of course!
    Another beautifully manufactured part! The install is literally a few seconds. The extra reach provides me a bit more security in confidently grabbing the rear brake. This is especially true when I wear heavier boots with more of a hiking sole than my usual SIdi boots which have a more racing-style sole and a more sensitive feel. Its a natural addition that just makes sense.

    Steven Melnyk
    Simple; effective; important
    On every bike that I have owned, I have added this feature. It ensures good braking by enlarging the lever surface. Very useful.

    Bike Fitment

    BMW HP2 Enduro

    2005 · 2006 · 2007 · 2008

    BMW HP2 Megamoto

    2006 · 2007 · 2008 · 2009

    BMW K1100 LT

    1991 · 1992 · 1993 · 1994 · 1995 · 1996 · 1997 · 1998 · 1999

    BMW K1200 GT

    2002 · 2003 · 2004 · 2005

    BMW K1200 RS

    1997 · 1998 · 1999 · 2000 · 2001 · 2002 · 2003 · 2004 · 2005

    BMW R850 R

    1994 · 1995 · 1996 · 1997 · 1998 · 1999 · 2000 · 2001 · 2002

    BMW R1100 R

    1994 · 1995 · 1996 · 1997 · 1998 · 1999 · 2000 · 2001

    BMW R1100 RS

    1993 · 1994 · 1995 · 1996 · 1997 · 1998 · 1999 · 2000 · 2001

    BMW R1100 RT

    1995 · 1996 · 1997 · 1998 · 1999 · 2000 · 2001

    BMW R1150 RT

    2001 · 2002 · 2003 · 2004 · 2005

    BMW R1200 RT

    2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013

    Sign Up For Our Newsletter