My Cart: 0 item(s)

Lifting Handle, Black
    Purchase Lifting Handle, Black
    • Part # 20540102
      Lifting Handle, Black

    • ★★★★★ ★★★★★
    • $229.95

    • In Stock
      Caution! Our Lifting Handle, Black does not fit all bike models. Please select your bike if you are not sure.
      Warning! Important information below in the description.

       

    -
    Write a Review


    Sign up to be notified when Lifting Handle, Black is back in stock!

    We will email you the current E.T.A. for Lifting Handle, Black
    Description Instructions Reviews Bike Fitment

    Description


    Lifting Handle, Black

    Lifting a motorbike onto the center stand is no easy task, as the leverage ratio is hardly perfect. This folding handle makes lifting the bike onto the center stand much easier, especially when the bike is fully loaded.

    The facts:

    • Fast deployment
    • Optimum leverage ratio.
    • Easy to lift bike onto center stand.
    • Non-slip, grooved grip.
    • Fast folding mechanism.
    • Precision machined of high quality material.
    • Anodized aluminum.
    • Lightweight construction.
    • The mounting point on the rear footrest bracket can be chosen depending on rider height.


     Wunderlich
     20540-102

    Please Note: Exceptions to model/year fitment

    Model:Starting:Ending:Notes:
    R1200 R 2015 2019 does not fit in combination with the inner fender 41590-202
    R1200 RS 2015 2019 does not fit in combination with the inner fender 41590-202
    R1250 R 2019 + does not fit in combination with the inner fender 41590-202
    R1250 R 2023 + Does not fit with original heated seat
    R1250 RS 2019 2022 does not fit in combination with the inner fender 41590-202

    *Installation estimated at 30 minutes for this part may vary depending on skill level.

    Instructions



    Reviews
    Write a review

    ★★★★★ ★★★★★
    4.75/5 Stars out of 4 Reviews
    5
    3
    4
    1
    3
    0
    2
    0
    1
    0
    Verified Buyer
    Quality Product Glitcchy Install
    (Albany NY) | August 30th, 2024
    As usual this product from Wunderlich was of excellent quality and once installed it works like a charm. Putting my RS onto the center stand is much easier than it was without it. The installation on my 2020 R1250 RS was not as easy as it looked in the instructions. The clearance between the center tray under the rider seat and the mounting screws on the lift handle was too small to allow for any tool to be inserted without first loosening the center tray and then flexing it to permit some extra clearance. However even doing that it was necessary to use only an Allen head bit and a 10 mm open end wrench to tighten the top screw. It was impossible to insert any ratchet and Allen head socket combination (or even just an Allen head socket) into the space available. NOTE: If you have an inner fender extender on your RS you will need to trim/remove a portion of it to permit the installation of this part. The part listing at Wunderlich indicates the lift handle will not fit if you have an inner fender extender but with some creative trimming of the inner fender it can be done.
    Verified Buyer
    German ingenuity
    | August 13th, 2020
    My 2020 R1250RS is difficult, to say the least, to put on the center stand as there is no grab rail. This handle gives you a grab point on the bike where there was none! Once you loosen the passenger peg it becomes quite simple to install. Well built but a bit salty for what it is. That said, it works.
    Verified Buyer
    LIFTING HANDLE- '16 R1200RS
    | March 16th, 2020
    There are no real instructions for installation for this model. The instructions provided does not show that the top bolt holding the handle to the frame rail cannot be installed using the torx bolt provided. The bottom torx can be used. I had to exchange the top torx bolt for a hex head bolt of the same length and make a short 5mm hex wrench by cutting one. Otherwise it fit well even with the BMW hard bag mounts.
    Show All Reviews
    Verified Buyer
    Looks and works well!
    | November 23rd, 2016
    This is a very nicely made product, and it compliments my R1200R perfectly. I chose black, and it blends right in, and does the job of making it easier to get on the center stand. The only small installation problem I had was getting the small screws on the inside of the mounting plate to attach. The problem is there is not quite enough clearance on the back side to get a wrench in there. I solved the problem by buying a special "tight spaces" ratchet. Perhaps a real BMW shop has a special tool. Anyway, eventually I got it attached. Highly recommend this product.
    Write Review:
    Lifting Handle, Black
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry63658Arq!




    Bike Fitment


    BMW R1200 R

    2015 · 2016 · 2017 · 2018 · 2019

    BMW R1250 R

    2019 · 2020 · 2021 · 2022 · 2023 · 2024

    BMW R1200 RS

    2015 · 2016 · 2017 · 2018 · 2019

    BMW R1250 RS

    2019 · 2020 · 2021 · 2022 · 2023 · 2024

    Sign Up For Our Newsletter