My Cart: 0 item(s)

Your Shopping Cart Is Empty
Valve Cover Guards, Silver (EURO-4)
    Purchase Valve Cover Guards, Silver (EURO-4)
    • Part # 8161537
      Valve Cover Guards, Silver (EURO-4)

    • (4.3) 15 Reviews
    • $349.95

    • In Stock
      Ships Today!
      Order within the next 0.00.00
      Caution! Our Valve Cover Guards, Silver (EURO-4) does not fit all bike models. Please select your bike if you are not sure.
      Warning! Important information below in the description.


    Write a Review

    Sign up to be notified when Valve Cover Guards, Silver (EURO-4) is back in stock!

    We will email you the current E.T.A. for Valve Cover Guards, Silver (EURO-4)
    Description Instructions Reviews Video Accessories Bike Fitment


    Valve Cover Guards

    Life insurance for the extremely damage-prone Boxer valve covers! This is a sound investment as the original plastic protector can disintegrate even if the bike tips over harmlessly, or can simply fold away if the bike slides.

    • Complete set with installation kit.
    • Protection from impacts, falls and slides No more grinding of holes in cover.
    • Protects the cylinder head cover from moving and destroying the cylinder bolt threads (cover attachment to head is "floating", without protection it could move at impact).
    • Protection for the front attachment bolt.
    • Optimal force distribution through shaped rubber bumpers between protector and valve cover (3M-bumper).
    • No screws etc. in the front impact area.
    • More than 4 mm (1/8") thick replaceable slide pad on each side.
    • 3 major double strength attachment points.
    • Hard anodized aircraft-spec aluminum alloy.
    • Replacement impact pads are available under the Related Products.
    • Made in Germany.

    Please note:

    • Our valve cover & cylinder protectors are compatible with the standard BMW valve covers. Mounting on Option 719 valve covers is not possible for technical reasons.
    • For use with Wunderlich Engine Protection Bars, 31741200 Wunderlich Engine Bar Extension Kit is required


    Please Note: Exceptions to model/year fitment

    Model: Notes:
    R nineT Does not fit Euro5 Models
    R nineT Pure Does not fit Euro5 Models
    R nineT Scrambler Does not fit Euro5 Models
    R nineT Urban GS Does not fit Euro5 Models



    Stuart johnson
    Very nice looking
    Classy covers. Fitup required some gentle force to settle the cushion. In conjuction with sw motech bars i think im protected . Nice packaging prompt shipping two thumbs up. Stu

    BMW R nine T
    Last time I wrote that I was happy with these guards and gave them 5 stars. Now I have to admit that these guards probably do a good job at very low speeds but at speed above 10-20 mph they just don't work or even damege the engine's Intake system. I laid down my bike on the left side when I was hit from behind by other motorcycle on a highway. The guard was ripped off and bent so badly that it cut off throttle intake manifold but also the engine head valve cover was scratched almost everywhere. Maybe the guard saved the valve cover from cracks but it broke the throttle so I wasn't able to ride the bike back home anyway. It was the worst damage to my bike besides broken Rizoma mirror and few scratches on exthost pipes, handlebar ends, clutch level and headlight. I wish I'd better bought crash bars instead of valve cover guards. Waist of money.

    BMW R nine T
    These guards have the best look one my boxer engine. I like titanium color, it looks awesome. Also they quality made and sit sturdy.

    ben collins
    Good product
    I added these to my RT and I feel that they would do a good job protecting the cylinder head in the event of a fall. It seems to be a good investment given the cost of replacing damaged heads. The installation was straightforward and took about 30 minutes.

    Chipp Robb
    Overpriced crap
    These used to be slightly better but they are worse now.. The rubber mounts on these are the stupidest thing I have ever seen. The rubber melts and. Then the bolts become loose and your "guard" falls off. On the previous version you could skip the rubber donuts and hard bolt them. With the new version the giant holes for the rubber grommets are bigger than both the bolts and the posts on the motor that you are bolting onto making them even weaker overall. With the previous version I could survive a drop, then hammer them out and put them back on. Not anymore. This is a 100% one use disputable product. It might protect your bike if you let it down gently, will disintegrate and fall off in anyKind of slide. The other useless part is the way the bottom mount is designed as a "secondary spark plug protector".. It is so weak it will snap and then tear into the speak plug book. It also sure is nice that only good reviews show on the web site.

    Cyl Head Guards or R Nine T
    Great design and material, but fitment was terrible. Had to fashion my own spacers to finally make it work and even then tabs were not flush with bike mounts.

    Great looking valve cover protection
    I purchased these to replace the old plastic covers on my '01 R1150GS. The Wunderlich covers look great and work with my CVM Elf pegs. I shopped around for other covers and the Wunderlich covers look the best, are well made and repairable.

    Best valve covers
    I reviewed other valve cover guards before buying these; main benefit is the best air-flow for my '01 air-cooled R1150R. Look good; fit well.

    A very good product
    These valave covers look great and they were fairly easy for me to put on myself. I am quite happy with my purchase. They are well built and seem sturdy. I have not had to test them out yetand I hope I won\\\\\\\'t have too. I would recommend these to other riders no doubt.

    Good protection
    easy to install, and look great, small price to pay for protection. I hope the only way I scuff these up are if I'm at the edge of my tire with a big smile on my face

    Karl von Ubin
    Installed on HP2 Enduro
    First thing, the parts were shipped very quickly and they look great. I don't have crash bars on the bike yet (purchased but not installed yet) and haven't crashed yet with these on(I ride dirt alot and so I crash a lot), so I don't know how they protect yet, other than they are way better than the stock ones that came with the HP2.

    They fit, they look good.
    They fit, they look good and I hope I don't find out if they work. They do look like they should work. Much better coverage than the stock protectors.

    Sarie Arar
    Good Protection
    I installed them on my New R 1200 GS 2012 model. I had the engine guard on, easy installation and perfect fit. They look good on the bike, the only thing I could not measure properly is the one millimeter space they recommend keeping between the part and the valve. But that was not an issue the piece is a great addition for protection and looks. Highly recommended for all time particularly off-road.

    Jim Reynolds
    I've installed my insurance...
    I installed these cylinder head protectors on my '11 GS in about fifteen minutes. Piece of cake. I had previously installed the engine protection bars. Even with the bars on I had no problem fitting them. You could shave off some time if you put these on first though. Nice fit, hope I never find out how well they work.

    great product
    the fit and finish of the protectors is top notch. Easy to install, just make sure you use the blue locktite on the bolts. The little rubber washers get all squished and distorted when torquing the bolts and look kind of funny, I will probably just remove them.

    Product Videos

    Related & Recommended

    Bike Fitment

    BMW R1200 GS

    2010 · 2011 · 2012

    BMW R1200 GS Adventure

    2010 · 2011 · 2012 · 2013

    BMW R1200 R

    2011 · 2012 · 2013 · 2014

    BMW R nineT

    2014 · 2015 · 2016 · 2017 · 2018 · 2019 · 2020

    BMW R nineT Pure

    2017 · 2018 · 2019 · 2020

    BMW R nineT slash 5

    2019 · 2020

    BMW R nineT Racer

    2017 · 2018 · 2019 · 2020

    BMW R nineT Scrambler

    2017 · 2018 · 2019 · 2020

    BMW R nineT Urban GS

    2017 · 2018 · 2019 · 2020

    Sign Up For Our Newsletter