KUKKO - 5-60mm Puller Set 17-K
This set contains the exact same tools as are supplied by BMW to dealers world-wide. This puller set is exactly what is needed for disassembly of the transmission shafts, removing bearings, compression of the transmission damper spring etc.
Comes as a 4-piece kit, with quick release spindle, separator 17 series and 18 series extractor, all neatly housed in a KUKKO-L-BOXX system. Also supplied is a tube of MSo2 grease for long term maintenance.
- For extracting ball bearings, roller bearings, inner rings and other flush seated parts.
- Especially handy since the release jaws are clamped quickly and centrally with a quick-release pressure spindle.
- The large bearing surfaces protect the part to be pulled despite sharp, wedge-shaped cutting edges which are pressed behind the parts to be extracted and put it between the bearing and seat.
- To pull off the tension bolt puller (Series 18) must be screwed into the separation device.
Separation Diameter: 12 - 75mm (1.2 - 3 inches)
Separation Bolt Spacing: 75 mm (3 inches)
Bore Diameter: M10 mm