Part # 2203034
Liqui Moly - Motorbike Performance Set

Liqui Moly - Motorbike Performance Set

German engineering in liquid form.

Gasoline may be less expensive than it once was but one thing is for sure; the quality of gasoline these days isn't getting any better! This performance set will noticeably improve the way that your bike runs!

The set consists of:

• 1 - 250ml bottle of Motorbike Fuel Stabilizer
• 1 - 125ml can of Motorbike 4T Bike Additive

If you are not able to ride your bike on a regular basis, or if you have several bikes, you can't ride them all at once. In any event, your bike may sit idle for longer than you like and modern fuel will deteriorate and cause problems that compromise optimal performance. This fuel stabilizer will help ensure that your bike is ready to go when you are. We recommend adding the stabilizer initially to condition the fuel and then at every fill-up on seldom ridden bikes or at the last fill-up when you anticipate that the bike may not be ridden for a while.

LIQUI MOLY Fuel Stabilizer preserves and protects fuel against aging and oxidation. Prevents corrosion throughout the entire fuel system. Prevents problems from occurring when any 2 or 4 stroke motor is decommissioned or not run on a regular basis. The product Increases operational reliability and has a lasting effect.

Instructions:
Add to the tank when fueling. Filling the dosage chamber (25ml) once is sufficient for 5 liters (1.25 Gallons) of fuel. Basically, add about half a bottle to a full tank on most motorcycles. Also suitable for long-term use in seldom used engines, for example garden equipment, pressure washers, etc. Before putting into storage, add the appropriate amount to a full tank and run the engine for approximately 10 minutes.

Once the fuel system has been stabilized, also add the entire can of bike additive to a full tank. We think that you will notice a huge improvement in the way your bike runs! It's certainly worth a try. We are confident that you will be so impressed, you'll want to add a can of LIQUI MOLY Bike additive to every tank of gas!

LIQUI MOLY Bike Additive increases engine performance. It removes deposits in the fuel system, in the injectors, valves, spark plugs and in the combustion chamber and also prevents renewed formation. This also reduces fuel consumption because the engine will run much more efficiently. Protects the entire fuel system from corrosion.

Instructions:
Add to fuel in all 4-cycle engines (carburetor or fuel injected). 125 ml is sufficient for 15 to 20 liters (4-5 gallons) of fuel. Add every time you fill up.

Please Note: This is a starter kit and the stabilizer will last for 2-3 applications, while the additive is typically enough for one tank of gasoline. You will find both products available individually under the related products.

Please note: Can only be shipped to US, Canada & Mexico!