My Cart: 0 item(s)
Description Reviews Bike Fitment
Wheel Balancer Adapter
This adapter will allow you to balance your rear wheel on a static balancer.
- Bore for axle: 12mm*
- Adapter 1 Diameter 80mm
- Adapter 1 Thickness: 15mm
- Adapter 2 Diameter 61.80mm/78mm (stepped)
- Adapter 2 Thickness: 25 mm
- Color: black
For all Paralever models with Paralever Strut
Examples: R1200 GS, RT, ST, R etc plus K1200/1300 S, R, GT etc.
*The part is manufactured of hard plastic. Check the diameter of the shaft on your balancer. If it's larger than 12mm, the center hole of the adapter can be enlarged on a lathe quite easily.
Write a review
4/5 Stars out of 6 Reviews
Ron Chapman | May 12th, 2022
The clearance between the OD of the adapter was quite a bit smaller than the id of the wheel on my 2020 R1250RT so it kept shifting as the wheel was rotated. Unfortunately I had already modified the adapter in my lathe to accommodate my balancer so I can't return it. I should have paid more attention before modifying the adapter.
Furman | April 23rd, 2021
I have an electronic (Hofmann) wheel balancer and need an adapter for my K1600GTL. I could of bought a larger cone from the manufacture but thy are around $300+. These adapter will work but a had to machine the center hole out a little larger. (.512). Have not balanced my wheel yet, but I don't see why they won't work.
Kent Niederhofer | February 22nd, 2021
I ordered a set of these wheel balancer adapters because my 2019 BMW R1250GS rear wheel has a pilot hole diameter of 62 mm which is substantially larger than the 10 mm rod on my static wheel balancer. I considered other alternatives including having an adapter made but none were as inexpensive as the Wunderlich adapter. I have yet to use them but I did test fit them to the stand and all works perfectly. For those that have balancers with larger rods, I believe the adapters can be drilled out (I would not do this with a hand drill but use a bench drill press) to fit your rod. They seem to be very durable and reasonably hard even though they are made from plastic (I'm guessing either HDPE or Nylon) and should last substantially longer than I'll ever need them to.
Show All Reviews