My Cart: 0 item(s)

R nineT Sport Tail Conversion Kits


Select your Bike Year & Model and then scroll down to view the kits & parts to get started!

We have created R nineT Sport Tail Conversion Kits section to help you transform your R nineT with this super sleek and light tail section. The bulky original license plate & tail light carrier is replaced with sporty simplified Wunderlich Tail Tidy kit. Three different kits with 3 different style tail lights

Use your original indicators or change out to LED indicators.

Just a few steps

  • Choose Sport Conversion Kit Style
  • Add optional LED indicators
  • Add any additional accessories if needed
Wunderlich Tail Conversions

Sport Standard Conversion

Fits the following models:
  • R nineT
  • R nineT Scrambler
  • R nineT /5
  • R nineT Pure
  • R nineT Urban G/S

Sport Stripe Conversion

Fits the following models:
  • R nineT
  • R nineT Scrambler
  • R nineT /5
  • R nineT Pure
  • R nineT Racer
  • R nineT Urban G/S

Sport Devil Conversion

Fits the following models:
  • R nineT
  • R nineT Scrambler
  • R nineT /5
  • R nineT Pure
  • R nineT Racer
  • R nineT Urban G/S
R nine T Sport Tail Conversions
Number of Products to Show
 
Sort Products By

Please note: Showing all products in this category. Select your bike to display only products for specific fitment
Turn Signal - Kellermann Bullet 1000 Part #7050320-28
The Bullet 1000® DF is a rear indicator in combination with a rear running lights and brake light function. It replaces the existing turn signal indicators, and can be utilized for the brake and rear running light. The light of the continuously glowing red rings give the tail of the motorcycle a spectacular look. 

Resistors are not included.
In Stock
Starting at: $139.95
Choose Color:

Torpedo Turn Signal Set, Front Part #44300100
The matching front indicators for the Torpedo LED indicators.

Resistors not included
In Stock
$100.95 $55.52

Bullet Turn Signal Set - Black Part #36340402
Classic, discreet halogen indicator with high light yield with low power consumption.

Can be used as Front or Rear Indicators.

No Resistors required
In Stock
$59.95

Turn Signal Adapter Set View Full Product
★★★★★ ★★★★★
Turn Signal Adapter Set Part #44960002 The adapter allows for the installation of the most common accessory turn signal, which is fastened using a threaded screw, to the original BMW turn signal attachment.
In Stock
$86.95

Resistor Harness 5W 39 Ohm View Full Product
★★★★★ ★★★★★
Resistor Harness 5W 39 Ohm Part #44109400 Thanks to the practical wiring adapter set with a built in resister and with standard plugs, there's no longer any need for soldering work on the cables because the plugs are compatible with the original plugs. This means all conversion works can also be quickly undone again with no additional effort.  To be used when converting to LEDs.
In Stock
$32.95

Resistor 5w - 39 Ohm Part #2057413 When LEDs are used instead of the stock bulb option, it can happen that the on-board computer shows "defective lamp" or the LED will not work properly causing the flash sequence to flash irregularly due to the low power consumption. By using the load resistance, the failure report at the on-board computer is avoided and the LED will operate as intended.
In Stock
$11.95

LED Turn Signal Adapters View Full Product
★★★★★ ★★★★★
LED Turn Signal Adapters Part #44109100 These adapters significantly simplifies the conversion of an indicator to a round plug both front and back. Thanks to the practical set with standard plugs, there's no longer any need for soldering work on the cables because the plugs are compatible with the original plugs.
In Stock
$24.95

Rhombus Turn Signal Left Rear Part #2024597
In Stock
$129.95 $110.46

Tail Conversion Stripe Sport, Black with US Plate Adapter Part #44110102G

This Tail Conversion Kit replaces the original tail light of the R nineT with a LED strip light and cleans up the bulky original license plate and tail light  tail section for this sleep and light sport tail tidy. It is compatible with either the passenger seat or the rear seat cowl.

US License Plate Adapter Required

In Stock
$426.90

Tail Conversion Devil Sport, Black Part #44111502
This kit eliminates the bulky tail light and also tucks the license plate and turn signals under the tail section of the bike. It is compatible with either the passenger seat or the rear seat cowl.

US License Plate Adapter Required
In Stock
$429.95

Tail Conversion Devil Sport, Black with US Plate Adapter Part #44111502G
This kit eliminates the bulky tail light and also tucks the license plate and turn signals under the tail section of the bike. It is compatible with either the passenger seat or the rear seat cowl.

US License Plate Adapter Required
In Stock
$465.90

Tail Conversion Std. Sport, Black with US Plate Adapter Part #44111302G

This Tail Conversion Kit houses the LED tail light (European version) and cleans up the tail and removes the bulky original plate and tail holder.

LED Tail Light P/N 6321000 required if your R nineT is a U.S. version.

US License Plate Adapter Required

In Stock
$411.90

Sign Up For Our Newsletter