wunderlichamerica.com: Side Stand Enlarger, Low Suspension

Description Instructions Reviews Accessories Bike Fitment

Description

Side Stand Enlarger, Low Suspension

A precisely machined extension plate that can quickly be bolted to the side stand eliminates the risk of your GS (low suspension models) getting bogged down and tipping over.

The facts:

Safe support for the machine on all surfaces.
Compensates for the leaning angle of the motorcycle.
Surface area increased by more than 100%.
8 mm (0.31")- thick Dural aluminum.
With external machined teeth for easy fold out.
Rustproof anodized black.
Rust protection for the original stand plate.
Cut-out for original foot lined with vibration-absorbing foam rubber.
CNC machined.
Easy to fit.
Made in Germany.

Note: Please see the Related Products tab above for the optional Spike Set. The spikes not only offer additional grip with the ground, they also add some height which can reduce the amount of lean angle.

Important fitment information: This part fits the model year up to the production date up to 08/2015. If you have a GS produced after you will need part number 27380700

Wunderlich
27380-600

Please Note: Exceptions to model/year fitment

Model:	Starting:	Ending:	Notes:
R1200 GS	2013	2016	For low suspension -08/2015
R1200 GS Adventure	2014	2018	For low suspension -08/2015

Instructions

Reviews

Star (23)
Star (0)
Star(0)
Star (0)
Star (0)

(5) 23 Reviews

John Wyss

Verified Buyer

09/20/2020

A necessity in my book

On the first bike I had, I rode with some friends to a roadhouse with a soft gravel parking lot, and after a rain, I put my stand down and it just sank into the ground and there goes the bike. I started carrying around one of those plastic 'hockey pucks' to put under the stand if need be, but it's quite tricky to toss it down in the right spot whilst still on the bike. Since that time, I always get a side stand enlarger which anchors the side stand even if the terrain is not helpful.

Mark Lindsay

Verified Buyer

06/07/2020

Great Kickstand Stablizer

Perfect fit and easy to install on my 2014 BMW 1200 GS. A bit pricey but a beautiful piece. Will greatly help when parking on non-pavement surfaces.

John Desko

Verified Buyer

08/26/2019

Very Happy with this product!

Perfect fit, easy to install and it looks good as well. I value the attention invested to keep this item light weight. I have had others on other bikes, but none equal this one.

EZ-NY

Verified Buyer

08/23/2019

Great Enlarger and very Easy to set

This is the second one I buy from Wunderlich for my wife bikes. First was for the 700GS and now for the 1250GS. This product is made well and very easy to install./ It does do the work it build for. Will recomand.

Rolando L.

Verified Buyer

07/06/2018

Great piece

Easy to install, looks great, does the job. Would recommend!

Frankie G

Verified Buyer

07/03/2018

Low, Low it fits

After several attempts to get a Side stand that actually fits My Ralley 2017 Low suspension this one does the job, easy to install , no fuss. Make sure you use loc- tight on the screws as this is held on the stand by the outside corners of the three screws, if one comes loose say bye , this is the most expensive side stand on the market but it good quality fits and works.

Ron

Verified Buyer

04/29/2018

Fits well.

Haven’t ridden with it on yet, but it was easy to put on, fits the foot of the kickstand on my lowered 2017 GS perfectly.

BRAD McVeigh

Verified Buyer

04/08/2018

Side stand enlarger

Nice fit on my lowered 2018 R1200GSA, when in the up position does not create any clearance issues. I would recommend.

Timothy McClure

Verified Buyer

08/19/2017

Excellent

This is great exactly as described and then some. Suburb quality. A must have are the spikes as well.

SAVA1959

08/01/2015

Great Product

Easy to install, sturdy, and does the job!

Goose

07/05/2015

Must Have addition for R1200GS LC

The stock kickstand pad on the R1200GS LC is woefully inadequate for any surface other than paved. If you value your cylinder heads (or crash bars, for that matter), do not hesitate to pick up this little do-dad. It may take the mentally challenged three minutes to install, but I doubt it. You will need star head driver bits and LocTite for a good quality installation, so plan ahead.

Jim W

07/04/2015

Very well made.

This is a seriously nice piece. But it does make the bit sit up a *touch* more. Borderline negligible, which is why it got 5 stars. It does not affect lean angle as much as other companies products my friends have tried.

Joe M

08/18/2014

Great upgrade

Very easy to install, looks great, great quality and functional.

Michael

07/21/2014

Lightweight simplicity

I purchased this enlarger over the other offerings because it was simple and light. The foot is 1 piece of aluminum. Others add an additional steel layer or are completely constructed of steel.

Don

07/05/2014

Top Quality

Extremely well crafted, solid, perfect fit and easy to install. Well worth the money.

frederick kallmayer

01/19/2014

the best big foot

The design is excellent; one piece of precisely milled aluminum secured with three high quality machines screws. The anti-vibration foam disc is a nice touch and the anodized finish gives it a much classier look than others. Easy install, fits perfectly with no contact with other parts of the bike.

Ed Notebaert

01/01/2014

Nice machine work

Excellent fit and finish. Machine work is very nicely done. Easily installed. Expensive but worth it.

Steve

10/15/2013

Good fit

Nice addition which makes me feel more secure putting my bike on its side stand in soft ground.

Cory Lyle

10/09/2013

Great Product!

High quality, discreet, does not get in the way or interfere with the bike in any way, easy to instal. I would definitly recommend this product.