My Cart: 0 item(s)

Engine Bars Adventure, Black
    Purchase Engine Bars Adventure, Black
    • Part # 8160095
      Engine Bars Adventure, Black

    • ★★★★★ ★★★★★
    • $379.95

    • In Stock
      Caution! Our Engine Bars Adventure, Black does not fit all bike models. Please select your bike if you are not sure.
      Warning! Important information below in the description.

       

    -
    Write a Review


    Sign up to be notified when Engine Bars Adventure, Black is back in stock!

    We will email you the current E.T.A. for Engine Bars Adventure, Black
    Description Instructions Reviews Accessories Bike Fitment

    Description


    Engine Bars Adventure, Black

    Permanent all-round protection in two versions: as BASIC, with optimum protection mainly aimed at touring and road use, or as “ADVENTURE” for traveling and/ or off-road use. Even the BASIC version is without equal and far superior to all the versions shown to date. The “ADVENTURE” goes yet further and complements the existing motor protection with a practically indestructible cage for bike underside and header pipe protection.

    The large radius in the crash area transmit the forces in a measured fashion to the application points and prevent jamming. “Adventure” Protection Bars Professional protection in all situations. Protects the engine block (undercarriage protection) and exhaust header pipes as well as the engine cover and fairing. Extra strong due to the additional mounting points at the center stand mounts. Definitely to be recommended for long-distance traveling and/or off-road use.

    Details:

    • Fairing is safely protected by the bar
    • Protection for motor and header pipe (ADVENTURE)
    • Additional bars protect the lateral engine covers
    • Indestructible protection for underside of bike (ADVENTURE)
    • In the event of a crash, the fairing protection bars prevent the bike from flipping over
    • Sturdy mounting points and even distribution of forces. The connecting strut means that the forces are absorbed from all attachment points
    • Attached to engine brackets, center stand mounts (ADVENTURE) and engine mounting points
    • All maintenance work can be done without removing the protection bars
    • Ground and cornering clearance not compromised
    • Powder coated titanium colored steel tubes
    • Detailed, easy-to-read instructions
    • Elaborately crafted circular tube
    • Easy to fit
    • Low weight
    • Made in Germany

    Please Note: Does Not fit models with Low Suspension



     Wunderlich
     26540-002

    PLEASE NOTE: Not compatible with original BMW aluminium engine protector


    Please Note: Exceptions to model/year fitment

    Model:Starting:Ending:Notes:
    F650 GS Twin20082012cannot be used with lowered suspension

    *Installation estimated at 40 minutes for this part may vary depending on skill level.

    Instructions



    Reviews
    Write a review

    ★★★★★ ★★★★★
    4.33/5 Stars out of 6 Reviews
    5
    3
    4
    2
    3
    1
    2
    0
    1
    0
    Solid built, look great
    (Portland, OR) | January 9th, 2015
    Fortunately, I haven't tested how well they work in tip over or crash, but love the way they look on my 2015 F700GS. Seems like great protection and I like the lines better than OEM a version.
    Good Bars, Great Headache
    (Ketchum, ID) | October 14th, 2012
    Having just bought a new 2013 F8, I did a lot of research to see what best I could do to protect it and keep it in good order. Wunderlich\'s Adventure Bars seemed like a no-brainer. Unfortunately, I had a very difficult time getting them to fit. Having already experienced this problem of aftermarket farkle not being updated for the new year with TT and a couple other companies, I contacted Wunderlich\'s tech support. The gentleman I spoke with was very helpful and gave me some pointers encouraging me to keep at the installation. Everyone in his company assured him, and thereby me, that they would fit. And lo and behold I was able to get them on! However, when I went to go on my first ride after installation I realized that the process had cracked the housing of the kickstand sensor, and I had to disconnect it and jump the circuit to make it worth. At this point I was into over eight hours of man time for the bars everyone was saying went on in about half an hour. I rode the bike to my local dealer (three hours away). To make a long story slightly shorter, the dealer ended up having to grind out the bars so they would fit around the kickstand and I am still waiting for the part to come in from Germany so the bike can be fixed. A brand new bike that will soon have to be put into storage for the winter. I am less than pleased. I will be happy to have the bars on the bike and still like the company, but would not recommend being a canary in a coal mine to anyone.
    Not so easy installation.
    (Bethlehem, GA) | October 11th, 2012
    Now that they are on the bike I am happy with the engine bars but getting them on was quite a bit of work. A couple of the holes did not line up and had to be enlarged with a drill to get the bolt aligned enough that it could be threaded into the frame. One of the bolts is located directly in line with the engine bar making it difficult to get to to secure. I ended up having to cut the short end of an allen wrench in half to reach the bolt to tighten it. My bike had the center stand already on it and getting the bottom bolt of the engine bars bolted on along with the center stand was also difficult. But, as I said , now that they are on I'm happy with them. Just hope I never need to take them off adn put them on again.
    Show All Reviews
    Fit Great
    (Platte City, MO) | November 20th, 2011
    These bars were very easy to install. I had heard horror stories from a friend who bought the Touratech bars and assumed it was going to be a nightmare. The Wunderlich bars installed with minimum fuss and total time was under an hour for the Adventure Bars, Extreme Skid Plate, and Oil Filter Cover. They look very nice installed also. I haven't put the bars to the real test, but they appear to provide at least as much protection as my friends who have Touratech and SW Motech bars. The extra attachment point provides what appears to be a very solid mount.
    As advertised
    (Sidney, BC) | June 11th, 2011
    Nice looking bars once they are on... a tough fit on the right side...took a little coaxing with a piece of 2X4 and a hydraulic jack...not sure why, followed instructions explicitly. Handled a pair of hiway pegs nicely. A very solid set.
    Superior fit and ease of installation
    (Grand Forks, ND) | February 13th, 2011
    Having just installed a set of Wunderlich Adventure Engine Bars, I want to commend the manufacturer on a job well done. The quality of the welding and finish was suburb and the installation took no more than 20 minutes. This was due to the perfect fit and well thought out instructions. Very well done and highly recommended.
    Write Review:
    Engine Bars Adventure, Black
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry03077Arq!


    Related & Recommended
    Products






    Bike Fitment


    BMW F650 GS Twin

    2008 · 2009 · 2010 · 2011 · 2012

    BMW F800 GS

    2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016

    Sign Up For Our Newsletter