Name: Engine Bars Adventure, Black
Brand: Wunderlich
SKU: 8160095
Price: 379.95 USD
Availability: InStock

Description Instructions Reviews Accessories Bike Fitment

Description

Engine Bars Adventure, Black

Permanent all-round protection in two versions: as BASIC, with optimum protection mainly aimed at touring and road use, or as “ADVENTURE” for traveling and/ or off-road use. Even the BASIC version is without equal and far superior to all the versions shown to date. The “ADVENTURE” goes yet further and complements the existing motor protection with a practically indestructible cage for bike underside and header pipe protection.

The large radius in the crash area transmit the forces in a measured fashion to the application points and prevent jamming. “Adventure” Protection Bars Professional protection in all situations. Protects the engine block (undercarriage protection) and exhaust header pipes as well as the engine cover and fairing. Extra strong due to the additional mounting points at the center stand mounts. Definitely to be recommended for long-distance traveling and/or off-road use.

Details:

Fairing is safely protected by the bar
Protection for motor and header pipe (ADVENTURE)
Additional bars protect the lateral engine covers
Indestructible protection for underside of bike (ADVENTURE)
In the event of a crash, the fairing protection bars prevent the bike from flipping over
Sturdy mounting points and even distribution of forces. The connecting strut means that the forces are absorbed from all attachment points
Attached to engine brackets, center stand mounts (ADVENTURE) and engine mounting points
All maintenance work can be done without removing the protection bars
Ground and cornering clearance not compromised
Powder coated titanium colored steel tubes
Detailed, easy-to-read instructions
Elaborately crafted circular tube
Easy to fit
Low weight
Made in Germany

Please Note: Does Not fit models with Low Suspension

Wunderlich
26540-002

PLEASE NOTE: Not compatible with original BMW aluminium engine protector

Please Note: Exceptions to model/year fitment

Model:	Starting:	Ending:	Notes:
F650 GS Twin	2008	2012	cannot be used with lowered suspension

*Installation estimated at 40 minutes for this part may vary depending on skill level.

Instructions

Reviews
Write a review

Currently Viewing Reviews with a rating of 4. Click here to reset.

★★★★★ ★★★★★

4.33/5 Stars out of 6 Reviews

Write a Review

5 ★

4 ★

3 ★

2 ★

1 ★

Not so easy installation.

★ ★ ★ ★

Steve Stringer (Bethlehem, GA) | October 11th, 2012

Now that they are on the bike I am happy with the engine bars but getting them on was quite a bit of work. A couple of the holes did not line up and had to be enlarged with a drill to get the bolt aligned enough that it could be threaded into the frame. One of the bolts is located directly in line with the engine bar making it difficult to get to to secure. I ended up having to cut the short end of an allen wrench in half to reach the bolt to tighten it. My bike had the center stand already on it and getting the bottom bolt of the engine bars bolted on along with the center stand was also difficult. But, as I said , now that they are on I'm happy with them. Just hope I never need to take them off adn put them on again.

As advertised

★ ★ ★ ★

Dan Webster (Sidney, BC) | June 11th, 2011

Nice looking bars once they are on... a tough fit on the right side...took a little coaxing with a piece of 2X4 and a hydraulic jack...not sure why, followed instructions explicitly. Handled a pair of hiway pegs nicely. A very solid set.