My Cart: 0 item(s)

Bar Riser, 20mm
    Purchase Bar Riser, 20mm
    • Part # 25801011
      Bar Riser, 20mm

    • ★★★★★ ★★★★★
    • $89.95

    • In Stock
      Caution! Our Bar Riser, 20mm does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review


    Sign up to be notified when Bar Riser, 20mm is back in stock!

    We will email you the current E.T.A. for Bar Riser, 20mm
    Description Instructions Reviews Bike Fitment

    Description


    Bar Riser, 20mm

    A barely-visible adjustment with a resounding effect. The handlebar risers bring huge gains in rider comfort and improved handling. The bike feels even lighter and more agile. The increased height allows more adjustment of the handlebar tilt to further improve the sitting position. Simple to fit in seconds and without the need for any other modifications.

    The facts:

    • Height increase of 20 mm.
    • Improved handling.
    • More direct riding feel.
    • Relaxed, upright riding posture.
    • Now it is possible to stand up when riding off-road riding without tiring and with better control.
    • No modification to the vehicle necessary.
    • Individually milled from strong Dural aluminum.
    • Anodized silver.
    • Complete with bolt set.
    • TÜV approved.

    Sold as a complete set including bolts and ABE approval.



     Wunderlich
     25801-011

    Instructions



    Reviews
    Write a review

    ★★★★★ ★★★★★
    4.9/5 Stars out of 10 Reviews
    5
    9
    4
    1
    3
    0
    2
    0
    1
    0
    Verified Buyer
    Nice Improvement to Riding Position
    | July 18th, 2019
    Seems like 20mm couldn't have much impact, but with only a few short rides the more upright position is noticeable and more comfortable. Installation instructions are not user friendly, this item begs for an installation YouTube from Wunderlich. It's doable and as described you do not need to open brake lines, but I would advise an extra set of hands would be good to have with you.
    Verified Buyer
    20 mm bar risers
    | June 28th, 2019
    raised the bars just enough to take some weight off of wrists and still allow some lean forward
    Verified Buyer
    Awesome Adjustment
    | July 24th, 2017
    Did exactly what I needed, eliminated that spot in my back that hurt after 1 hour.
    Show All Reviews
    Verified Buyer
    Nice product. (2016 F800GT)
    | June 10th, 2017
    Like some others, I found the installation instruction "pictographs" to be rather hard to decipher. Since the right brake caliper hydraulic line MUST be moved in order for the brake line to not be too short, it is imperative that the line be relocated like they show. However, figuring out how to do it is a bit puzzling until you take the brake line mount off and see that it's two pieces, not one. Then it's fairly easy. Also, if you look closely at the handlebar, you'll see that it has little crosses stamped on it to aid with re-aligning the bar in the clamps and the brake lever. The original positions seem OK for me at 5' 10". You may want to play with these a bit. You wouldn't think that 20mm would be all that much, but it does make a subtle difference that really doesn't show itself until you've ridden for about an hour or so. I've also got the Wunderlich air deflector on the top of my windshield, but I did not have to change anything with that even with the slightly different riding position. It appears that the 20mm rise is about the most you would be able to do with this bike, and not have to put longer brake lines, wires etc. Even with the brake line relocation, it still seems pretty tight with the bike on the center stand and the forks fully extended. So, is it worth it? Yes, I think in the long run you will notice subtle differences in fatigue level, neck strain, etc. Very nicely made product, and very high quality that should last the life of your bike. Just needs better instructions!!
    Verified Buyer
    Good Product
    | February 1st, 2017
    For reference I am 6'1". A quality product nicely finished. The rise is just right getting me a more upright but still keeping a slight forward lean. On my GT there did not appear to be enough space to pass the brake caliper up and over as shown. The brake line was tightly wrapped to electrical lines. We cut the tie wrap and rolled the brake reservoir forward a bit. This gave enough slack to use the provided bracket. All else very straight forward.
    No problems
    (N Ferrisburgh, VT) | October 20th, 2015
    Received in a timely manner. Well made. Instructions were puzzling but correct. No bleeding of brakes required. Looks good and raises bars as advertised, but did not make a large enough improvement for me.
    Just rite
    (Portsmouth, RI) | December 17th, 2014
    Just enought still sporty,and takes some weight of my hands
    Good product
    (Seattle, WA) | October 19th, 2014
    Instructions confusing. They provided me with BMW F800GT & f800 gs instructions. BMW F800GT instructions shown f800gs Very confusing.
    More than you Think!
    (Great Neck, NY) | September 8th, 2014
    I purchased these risers because I needed more bar height but did not want to replace brake lines or throttle cable. 20mm sounded like very little but feels like a completed different bike. The bar comes up 20mm and back about 10mm because of the geometry of the front end. There is some rerouting necessary but the brake system does not need to be opened or bleed, decent instructions with good photographs.
    Great item
    (Hoover, Al) | March 9th, 2014
    This item is beautifully finished, and does exactly what it is advertised to do. Note that when it is installed on an F800GT, there is a bit of extra work, which isn't advertised. You must remove the reservoir from the handlebar, and remove the right caliper (not completely from the bike, just unbolt). Then reroute the caliper up and over the other brake line, and reinstall. Then reinstall brake lines up and over approximately an inch, with the supplied bracket. This IS clearly detailed in the supplied directions, but not advertised anywhere. Still an easy install.
    Write Review:
    Bar Riser, 20mm
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry53562Arq!




    Bike Fitment


    BMW F800 GT

    2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2019

    Sign Up For Our Newsletter