My Cart: 0 item(s)

Brake Lever Enlarger
    Purchase Brake Lever Enlarger
    • Part # 8160136
      Brake Lever Enlarger

    • ★★★★★ ★★★★★
    • $73.95

    • In Stock
      Caution! Our Brake Lever Enlarger does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review


    Sign up to be notified when Brake Lever Enlarger is back in stock!

    We will email you the current E.T.A. for Brake Lever Enlarger
    Description Instructions Reviews Bike Fitment

    Description


    Brake Lever Enlarger

    2.5" in length

    It's important to be able to find the rear brake pedal when you need it! The original brake lever tip is a bit too small, this enlarger is mounted easily over the existing one. It substantially increases the size of the rather small original brake pedal and provides a greater margin of safety and level of comfort. In addition to the added safety this part has also a very nice technical appearance. The precision machined upper and lower part "sandwich" the original lever, the machined grooves on the top part provide excellent grip, especially important on wet days. Made of solid CNC machined aluminum and clear anodized for a beautiful, durable silver finish. Once you fit it, you won't go back...

    For a shift lever enlarger, check out part number 8160432.

    Installation tip:
    We recommend a drop or two of thread locking fluid (Loctite) on the bolt threads when installing to prevent them from coming loose and the part falling off. Available under the Related Products.



     Wunderlich
     39780-001
    *Installation estimated at 15 minutes for this part may vary depending on skill level.

    Instructions



    Reviews
    Write a review

    ★★★★★ ★★★★★
    4.94/5 Stars out of 18 Reviews
    5
    17
    4
    1
    3
    0
    2
    0
    1
    0
    Pages 1   2
    Verified Buyer
    Brake pedal
    | September 14th, 2021
    The brake pedal was easy to install and enlarged the pedal as I needed it to. The only issue was that the small supplied tube of thread locker was dry so I ran out and purchased a tube. Excellent product that required a lot of machining to get it right!
    Verified Buyer
    F 800GT brake enlarger
    | February 11th, 2021
    bought this with the shifter enlarger, nice to be able to find the brake much safer and looks good
    Verified Buyer
    Brake lever enlarger
    | August 19th, 2019
    While not designed for the Honda NC700x it works perfectly, just what I needed. Used thread locker and just a dab of Lexal silicone adhesive just in case it came loose I wouldn't lose it. Expensive but worth it.
    Show All Reviews
    Verified Buyer
    BRAKE ENLARGER
    | August 6th, 2019
    Just Perfect! Fit is EXACT!! Install is Quick. A needed part for my BMW!!
    Verified Buyer
    Perfect, eliminates trying to find the rear brake and raises it
    | July 24th, 2017
    Excellent product, raised the brake to where I can find it and actually actuate the rear brake without forcing my foot forward awkwardly. Plus it's wider so I don't have to move my foot inward.
    Verified Buyer
    As advertised
    | March 22nd, 2017
    Only giving it a 4 because I haven't actually done any riding since I put it on, which was a very easy install, as the machined grooves of the two pieces help them to properly position themselves, and the result is a very grippy much wider lever. I may later even cut the enlarger back in a little, depending, as sometimes while cruising the highway my foot likes to migrate off to the side. Will need to adjust to the surface being a little higher also, but overall thinking I'm going to be much happier than with just the stock lever, especially as I'm trying to "adventurize" my ride a little.
    Should have been OEM
    (Northville, MI) | October 8th, 2015
    Exactly what I needed. Easier to find and apply rear brake. Easier to modulate. More confident as well. It was easy to install. It has grooves that snugly fit into the existing brake. Had it about 1500 miles so far and its solid. Takes 3 minutes (or less) to install
    Does it work?
    (Oklahoma City , OK) | June 3rd, 2015
    Yes, it does! I have ordered several things from Wunderlich and not one had to be returned for any reason. Everything fits and works like it is supposed to and from all grade A quality materials.
    brake lever enlarger
    (Jacksonville, Fl.) | February 18th, 2015
    It works, easy install, all parts included. Now I can find my brake lever.
    well-built, works well
    (Maple Falls, WA) | July 20th, 2014
    The foot peg lowering kit I used on my F800GT moves the pegs down and outward, leaving the brake foot not well-aligned with the brake. This enlarger takes care of that potentially serious problem nicely, looks and feels quality construction, and is a simple install.
    Write Review:
    Brake Lever Enlarger
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry1531552Arq!




    Bike Fitment


    BMW F800 GT

    2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2019

    BMW F800 R

    2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018 · 2019

    BMW F800 S

    2006 · 2007 · 2008 · 2009 · 2010

    BMW F800 ST

    2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012

    Sign Up For Our Newsletter