My Cart: 0 item(s)
Description
Reviews
Bike Fitment
Description
Engine Cover Bolt Gasket
The rubber gaskets at the base of the valve cover and crank cover bolts should be replaced from time to time. It's not really necessary to replace them with the same frequency as the valve cover gaskets however after some years the rubber gets hard and the gaskets can crack, leading to oil leaks. The old gaskets can be cut off with a sharp blade or some sort of cutters. The new gaskets are pliable and easy to push onto the bolts.
Note: These are sold each.
For a K75 Valve Cover you need 10 and for K100 - 12
For a K75 Crank Cover you need 8 and for K100 - 10
Equivalent to 11 14 1 460 934
BMW
11 14 1 460 934
11141460934
Reviews
Write a review
Currently Viewing Reviews with a rating of 5. Click here to reset.
1
0
0
0
0
Mel Atkins | March 21st, 2020
These were nice and soft to replace the old hard ones. Tight fit on the bolt, but a little rubbing alcohol and they slipped right on. Alcohol worked great for removal of old ones too.
Popular Products
Bike Fitment
BMW K75
1985
· 1986
· 1987
· 1988
· 1989
· 1990
· 1991
· 1992
· 1993
· 1994
· 1995
· 1996
BMW K75 RT
1989
· 1990
· 1991
· 1992
· 1993
· 1994
· 1995
· 1996
BMW K75 S
1985
· 1986
· 1987
· 1988
· 1989
· 1990
· 1991
· 1992
· 1993
· 1994
· 1995
BMW K100
1983
· 1984
· 1985
· 1986
· 1987
· 1988
· 1989
· 1990
BMW K100 LT
1986
· 1987
· 1988
· 1989
· 1990
· 1991
· 1992
BMW K100 RS
1983
· 1984
· 1985
· 1986
· 1987
· 1988
· 1989
· 1990
· 1991
· 1992
BMW K100 RT
1984
· 1985
· 1986
· 1987
· 1988
· 1989