Part # 31040201
Handlebar Risers

This product definitely did what I was hoping. As an aging rider the pressure on my hands and numbness was becoming an issue. This is now resolved with these risers. The install was challenging as the instructions are terrible. Had to augment with other Youtube videos to get this install across the finish line. That said, once they are on, they definitely do what they are supposed to.

I found the install easy. I could only bring the risers to a certain point toward me as the clutch and brake reservoir touched it. All in all a good product.

I installed this kit on my 2018 R1200RT. Works very well, however the install instructions are not exactly for my bike. Couple important points. When pulling the handlebar rubes with the included tool from the OEM BMW risers, there are two screws to use. One to get the process started, another to finish it (Half way they should be switched out), otherwise you will strip the threads on you handlebar tubes. The second important item is that the electrical connectors (and there are multiple) on my bike had little clips. Just simply pulling them like in the instructions state, will result in ripped cables (very thin wires, probably for heated grips). These tabs must be lifted before pulling. We spent about 2 hours on install, including the fitting. Also note that the right side break fluid reservoir will limit the angle of install tilting towards the rider. This is not a significant problem but should be noted before finalizing the tilt angle of the risers. I love the risers, 5 stars. Install instructions 2 stars. Wunderlich should really review their schematics.

I had a terrible experience installing this risers on my RT. The instructions are almost useless. The product is very expensive and one of the screws was severely damaged so I couldn't install it. I bought them for a long journey on my RT for nothing since I can't use them. COMPLETE WASTE OF TIME AND MONEY. Not recommended.

I just has these installed on my RT, and Like the result. I spoke with 2 dealers, and decided to have these installed instead doing it myself. Glad I did, even though it cost 1.5 hrs of labor. They had me sit on the bike before the final tightening. I had the riser "cams" titled slightly toward me to move the bars slightly closer, while providing most of the potential bar rise. I did this to allow my arms to be more horizontal to the ground, and to ride more upright, to help relieve upper back/shoulder soreness on longer rides. Minor issue: The riser color is close, but not perfect match the handle bar color. Most would not notice this.

The instruction that come with this are the worst i have ever seen for 300 plus dollars you would think someone could have better instructions.

100% usefull.