My Cart: 0 item(s)

Engine Protection Bars, Silver
    Purchase Engine Protection Bars, Silver
    • Part # 8160735
      Engine Protection Bars, Silver

    • ★★★★★ ★★★★★
    • $470.95

      Estimated Install
      Time 45 minutes*

    • In Stock
      Caution! Our Engine Protection Bars, Silver does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review


    Sign up to be notified when Engine Protection Bars, Silver is back in stock!

    We will email you the current E.T.A. for Engine Protection Bars, Silver
    Description Instructions Reviews Video Accessories Bike Fitment

    Description


    Engine Protection Bars, Silver

    With these engine bars, we've applied our extensive experience in Engine Protection Bar design and once again hit a home run. This completely new design, developed especially for the R1200 RT, provides outstanding protection in more ways than one. Not only does it protect the valve covers from damage, it also protects the sump. The engine guard securely mounts at six optimally placed mounting points which share the load and protect from serious damage in most tip over situations. Cornering clearance is not compromised and all routine maintenance can be carried out without the need for removal. Installation is easily carried out with basic tools and no cutting or modification of any type is required. The engine protection bar is available in either a chrome finish or powder coated silver. The bar looks great and integrates perfectly with the RT's design.

    Check out these facts:
    • • Even load distribution
    • • Protects cylinders and fairing
    • • Protects sump and oil filter
    • • Strong mounting system
    • • Removal not required for maintenance
    • • Precision steel construction
    • • Cornering clearance not compromised
    • • Easy to install
    • • No modifications needed
    • • Available in silver or chrome (chrome under Related Products tab)
    Please note the following:
    • These bars are not designed to be compatible with the Original BMW accessory valve cover protectors.


    Please Note: The video for this product shows a bike that also has the saddlebag protection bars installed.



     Wunderlich
     20380-001
    *Installation estimated at 45 minutes for this part may vary depending on skill level.

    Instructions



    Reviews
    Write a review

    ★★★★★ ★★★★★
    4.61/5 Stars out of 38 Reviews
    5
    25
    4
    11
    3
    2
    2
    0
    1
    0
    Pages 1   2   3   4
    Engine Protection Bars, Silver
    | February 19th, 2022
    at first, directions looked daunting. but they were an easy install and the fit and look are great! Very Happy
    engine guard
    | September 4th, 2020
    Look great and super fast shipping from Wunderlich. Thanks for the great service.
    Verified Buyer
    Walked away
    | August 26th, 2018
    I had Wunderlich engine and bag bars on my 2006 RT when I had a slow-speed (5 mph?) accident at an intersection. I struck the right rear fender of the car in front of me and the bike fell to the right, coming to rest against a rather high curb on the engine and bag bars. If I hadn't had the bars on the bike, I think the weight and momentum of the falling bike against the curb would have broken my right leg. Short story, I got a new bike and got new bars.
    Show All Reviews
    Verified Buyer
    Engine protection bars
    | August 25th, 2018
    Fit was great, shipped fast and packaged well. Look great on my r1200rt. Installation wasn’t too bad, but could use a little more clarity in the instructions. Pricey.
    Verified Buyer
    engine protection bars
    | October 28th, 2017
    The bars are nice. Only problem I had was getting the left? clutch side attachment at the top done. That was really not the bars fault, the oil line attachment to the same point did not line up exactly and had a hard time getting the bolt into the threads. Had to enlarge the hole on the bars ear just a little to make it fit. Probably the powder coating makes the holes a little smaller than intended. Instructions were not very clear. Loved the color photographs on the gps mount.
    Verified Buyer
    Great Product
    | March 19th, 2017
    The bars were packaged very well and shipped in a timely manner. The installation wasn't difficult. The bars look very good on the bike and I feel the engine is well protected. I would recommend this product to others.
    Very Satisfied
    (Denton, Tx) | October 12th, 2015
    I had no problems with the installation ( the rubber mallet was a great idea ) and they look great. Very much worth the price to protect those fragile cylinder head covers.
    Good
    (La puente, Ca) | September 17th, 2015
    Take a little effort to install. But okay
    Crash Bars for the 2011RT
    (maryville, tn) | May 11th, 2015
    Fits pretty well, however the directions don't mention removing a bolt you need to use to secure them -seems strange, also the stock BMW cyl head covers WILL FIT -however they are tight, but DO FIT. yes they will get scrapped up also -but that's a given as will the crash bars too. over all - good solid protection with these bars.
    engine protection bars R1200RT.
    (Tigard, Oregon) | April 20th, 2015
    The product seems to be well made,except engineers need to reengineer tolerance fit measurements. I had to reshape the under mount by about a 1/4 to 3/8. It was off just enough to not work. One side mount loop that protects the valve covers had to be slightly pressured into place and the set screw had to be replaced. I think I lost it in the fight. That tiny screw should be enlarged to better accommodate the vibration. And why have the screws poin rt ing in two different direction? I suggest red locktite. They already worked loose.
    Write Review:
    Engine Protection Bars, Silver
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry23251Arq!


    Product Videos



    Related & Recommended
    Products






    Bike Fitment


    BMW R1200 RT

    2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013

    Sign Up For Our Newsletter