My Cart: 0 item(s)

Integrated GPS Mount
    Purchase Integrated GPS Mount
    • Part # 8600888
      Integrated GPS Mount

    • ★★★★★ ★★★★★
    • $189.95

      Estimated Install
      Time 60 minutes*

    • In Stock
      Caution! Our Integrated GPS Mount does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review


    Sign up to be notified when Integrated GPS Mount is back in stock!

    We will email you the current E.T.A. for Integrated GPS Mount
    Description Instructions Reviews Video Accessories Bike Fitment

    Description


    Integrated GPS Mount

    Finally the navigation device is positioned so that it can be seen. The rider does not have to turn his head away from the road ahead, and in tight traffic situations the device is only a quick glance away.

    Standard navigation brackets attached to the upper fork clamp are often in the way of tank bags, and can make access to the ignition lock quite difficult.

    The facts:

    • Designed to fit 2010 and later model R1200 RT
    • Easier and safer navigation.
    • Easier access and operation of device.
    • Adjustable angle
    • Easy to fit, no drilling etc. required.
    • Lightweight anodized aluminum
    • Versatile: Can be used with Garmin ZUMO, BMW Navigator and TomTom Rider I + II (For the TomTom Rider I/II we also recommend our lockable "Extrem" holders, available under the related products.
    • Compatible with a Garmin Nüvi 500 series in conjunction with the adapter kit, part number 8600808 (available under the Related Products.
    • Sold with complete fitting kit for easy installation
    • Made in Germany

    Fitting this part is easy and no drilling or other permanent modifications are needed. Please review the installation instructions for more information.

    Important fitment note: For models up to and including 2009, please order part number 8600887, available under the Related Products.

    Please Note: If you have a Garmin 660, please check the back of the cradle. If the back of the cradle is stepped where the power wire exits, you should additionally order 4 of the rubber mounts that are available under the related products. Alternatively, you can use 4 - 10mm spacers that you may be able to make or acquire locally.



     Wunderlich
     21170-100
    *Installation estimated at 60 minutes for this part may vary depending on skill level.

    Instructions



    Reviews
    Write a review

    ★★★★★ ★★★★★
    4.87/5 Stars out of 39 Reviews
    5
    35
    4
    3
    3
    1
    2
    0
    1
    0
    Pages 1   2   3   4
    Forget the others, this is the one.
    (Walla Walla, WA) | September 20th, 2011
    I purchased this about a month ago to mount my Zumo 550. I am NOT a tool guy and had a friend help me with the install. We finished an hour after we started. The instructions are well thought out and the mount fit perfectly. The only niggle is that the bottom of the GPS unit obstructs the idiot lights. I can live with that. Easy to reach and program while riding. I give it two thumbs up!
    Quality lives up to the price
    (Boston, MA) | September 17th, 2011
    Puts your nav in a great spot inside the windscreen, not down in front of the tank bag. Just beware a PROPER install is not for someone afraid or challenged at taking the bike apart. The interior brace is critical for stability of the finished product, and takes some patience. The instructions lead you to believe it can just be slipped onto the interior "dashboard" support, but the angles in that BMW piece make that impossible with the short screws provided. The clasp needs to started with one screw the piece installed, then you rotate the clasp into place and start the second screw to secure it. All this is done in tight quarters with the dash pulled backwards off the instrument cluster. The end result is well worth the effort, but this isnt a 30 minute RAM mount installation
    Glenn S. from Texa Hill Country
    (New Braunfels, Tx) | July 4th, 2011
    Put this on a 2010 1200RT and had to file a notch in the bracket with the angle on it to even get it to go into place with the screws and special nutin place per the installations instructions, but other than that it is probably the best solution to mount a gps. I used another brand water resistant case for my TOMTOM GO730 we use in Europe, and the reflection from the flexible window on it is a slight issue, but with a dedicated weatherproof motorcycle GPS it would be great.
    Show All Reviews
    Perfect fit and line of sight on 2011 RT1200 RT.
    (Mar Vista, CA) | July 3rd, 2011
    Looking for a way to mount my older Zumo 450 taken off a Honda Goldwing. Did not want to mount it on the handlebar off center from viewing. The Wunderlich mount was a perfect solution. Strong and easy to mount. The on line video's helped. There is zero vibration on the Zumo and it is even easy for me to reach.
    Perfect Location for GPS
    (Nashville, TN) | June 6th, 2011
    The Wunderlich GPS mount puts the GPS unit in the right location to see the screen but not be distracted by looking away from the road. It is easy to mount and holds the GPS without a lot of vibration. The instructions showed a slight difference in the placement of the access hole for removing the mirrors on my 2011 R1200RS. I called and got clear instructions from the Wunderlich customer service rep. and got the job done without a hitch.Good product. Good service.
    Works Great on My 2011 RT
    (Langley, BC, CA) | May 27th, 2011
    I had my Garmin Zumo 660 on another bike with a ram mount on the handlebar. Although that worked, I always had to look down and to the left to see it. Now with the RT and the Wunderlich integrated GPS mount it is much better positioned. Installation went well, but the mirrors were a bit difficult to remove and then running the thick wire from the GPS mount down to the plug on the bike was a bit tricky. The instructions could have been a bit better in regards to what screws to use where, but all in all it went well. Looks and works great!
    2011 RT mount
    (Phx, Az) | May 23rd, 2011
    As it did on my 09, this mount for my 2011 was an easy mount job which puts the GPS front and center with very solid feel. I have not seen a better GPS mount out there. Highly recommended.
    Awesome GPS Mount
    (Swift Current, SK) | May 22nd, 2011
    Ordered for my 2011 RT. Install went fairly smooth. Looks very nice once in place and puts the GPS unit in the perfect position. Mounted a Garmin Zumo 665 and the bracket works well for the magnetic XM antenna as well.
    Integrated GPS Mount 2010
    (Columbus, OH) | May 21st, 2011
    Purchased before vehicle delivery, and I had the Dealer install it when they did the final build out of the crate. The item looks good and does the job without interfering with the adjustable windscreen. I mounted a Zumo 550 I had previously installed on a Harley Road Glide, and it works as advertised. The position directly in front of the rider is a plus, as you never have to take your eyes from what is in front of you even if you elect to make minor adjustments while on the move.
    Write Review:
    Integrated GPS Mount
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry03078Arq!


    Product Videos



    Related & Recommended
    Products






    Bike Fitment


    BMW R1200 RT

    2010 · 2011 · 2012 · 2013

    Sign Up For Our Newsletter