My Cart: 0 item(s)

Integrated GPS Mount
    Purchase Integrated GPS Mount
    • Part # 8600888
      Integrated GPS Mount

    • ★★★★★ ★★★★★
    • $189.95

      Estimated Install
      Time 60 minutes*

    • In Stock
      Caution! Our Integrated GPS Mount does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review


    Sign up to be notified when Integrated GPS Mount is back in stock!

    We will email you the current E.T.A. for Integrated GPS Mount
    Description Instructions Reviews Video Accessories Bike Fitment

    Description


    Integrated GPS Mount

    Finally the navigation device is positioned so that it can be seen. The rider does not have to turn his head away from the road ahead, and in tight traffic situations the device is only a quick glance away.

    Standard navigation brackets attached to the upper fork clamp are often in the way of tank bags, and can make access to the ignition lock quite difficult.

    The facts:

    • Designed to fit 2010 and later model R1200 RT
    • Easier and safer navigation.
    • Easier access and operation of device.
    • Adjustable angle
    • Easy to fit, no drilling etc. required.
    • Lightweight anodized aluminum
    • Versatile: Can be used with Garmin ZUMO, BMW Navigator and TomTom Rider I + II (For the TomTom Rider I/II we also recommend our lockable "Extrem" holders, available under the related products.
    • Compatible with a Garmin Nüvi 500 series in conjunction with the adapter kit, part number 8600808 (available under the Related Products.
    • Sold with complete fitting kit for easy installation
    • Made in Germany

    Fitting this part is easy and no drilling or other permanent modifications are needed. Please review the installation instructions for more information.

    Important fitment note: For models up to and including 2009, please order part number 8600887, available under the Related Products.

    Please Note: If you have a Garmin 660, please check the back of the cradle. If the back of the cradle is stepped where the power wire exits, you should additionally order 4 of the rubber mounts that are available under the related products. Alternatively, you can use 4 - 10mm spacers that you may be able to make or acquire locally.



     Wunderlich
     21170-100
    *Installation estimated at 60 minutes for this part may vary depending on skill level.

    Instructions



    Reviews
    Write a review

    Currently Viewing Reviews with a rating of 5. Click here to reset.
    ★★★★★ ★★★★★
    4.87/5 Stars out of 39 Reviews
    5
    35
    4
    3
    3
    1
    2
    0
    1
    0
    Pages 1   2   3   4
    Great GPS Mount for the R1200RT
    (Plano, TX) | July 1st, 2012
    This is a great GPS mount for the R1200RT, with design lines that blend well with the design of the bike itself. It also performs this function without looking like a big metal storage shelf or an erector set.
    GPS mount for BMW R1200RT
    (Yorba Linda, Ca.) | May 21st, 2012
    This is a great mount. I had the dealer install it, but it did not look to be very difficult to install. Holds my Garmin Zumo 660 very solid and it does not vibrate. Looks very "clean" mounted just above the gauges. The GPS is a little closer to me than my friends with the mount from BMW. Makes it a bit easier to reach while riding.
    Solid support in the right location. Be patient installing.
    (North Reading, MA) | April 29th, 2012
    Patience is a virtue during installation. The orientation of components is not well described in the instructions, nor immediately obvious during installation. Once installed it blends nicely with the look of the bike, provides solid support for my old and heavy Garmin 2610, and positions it so my relatively short arms can reach. Be sure to bring adjustment tools on the first ride as four screws need to be loosened to change the viewing angle.
    Show All Reviews
    GPS Mount
    (Salem, OR) | April 26th, 2012
    Perfect location. Close enough to let my Garmin 220 be visible, but not in the way. Solid and well designed. Don't plan on installing in a few minutes. The instructions are fine if you are familiar with BMW assemblies, if not you'll want to take your time. Well worth the effort.
    The right choice!
    (Caledon East, Ontario) | April 13th, 2012
    This is a perfect solution to the obstructive position that most dealers advocate for the Zumo 660, i.e. on the left handlebar interfering with the mirror. Installation is easy but don't rely on the instructions provided.
    R1200Rt GPS mount
    (Burlington, CT) | September 27th, 2011
    Excelent mount. Have used other , more expensive mounts and found this one to be more rigid and offers more adjustment. Instructions are inacurate but you will figure it out very easily.Does however, take some effort to install Great product for the money.
    Forget the others, this is the one.
    (Walla Walla, WA) | September 20th, 2011
    I purchased this about a month ago to mount my Zumo 550. I am NOT a tool guy and had a friend help me with the install. We finished an hour after we started. The instructions are well thought out and the mount fit perfectly. The only niggle is that the bottom of the GPS unit obstructs the idiot lights. I can live with that. Easy to reach and program while riding. I give it two thumbs up!
    Quality lives up to the price
    (Boston, MA) | September 17th, 2011
    Puts your nav in a great spot inside the windscreen, not down in front of the tank bag. Just beware a PROPER install is not for someone afraid or challenged at taking the bike apart. The interior brace is critical for stability of the finished product, and takes some patience. The instructions lead you to believe it can just be slipped onto the interior "dashboard" support, but the angles in that BMW piece make that impossible with the short screws provided. The clasp needs to started with one screw the piece installed, then you rotate the clasp into place and start the second screw to secure it. All this is done in tight quarters with the dash pulled backwards off the instrument cluster. The end result is well worth the effort, but this isnt a 30 minute RAM mount installation
    Glenn S. from Texa Hill Country
    (New Braunfels, Tx) | July 4th, 2011
    Put this on a 2010 1200RT and had to file a notch in the bracket with the angle on it to even get it to go into place with the screws and special nutin place per the installations instructions, but other than that it is probably the best solution to mount a gps. I used another brand water resistant case for my TOMTOM GO730 we use in Europe, and the reflection from the flexible window on it is a slight issue, but with a dedicated weatherproof motorcycle GPS it would be great.
    Perfect fit and line of sight on 2011 RT1200 RT.
    (Mar Vista, CA) | July 3rd, 2011
    Looking for a way to mount my older Zumo 450 taken off a Honda Goldwing. Did not want to mount it on the handlebar off center from viewing. The Wunderlich mount was a perfect solution. Strong and easy to mount. The on line video's helped. There is zero vibration on the Zumo and it is even easy for me to reach.
    Write Review:
    Integrated GPS Mount
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry1931962Arq!


    Product Videos



    Related & Recommended
    Products






    Bike Fitment


    BMW R1200 RT

    2010 · 2011 · 2012 · 2013

    Sign Up For Our Newsletter