Name: Handlebar Conversion - Tube-Style Bars
Brand: Wunderlich
SKU: 31000501-502
Price: 508.95 USD
Availability: InStock

Description Instructions Reviews Bike Fitment

Description

Handlebar Conversion - Tube-Style Bars

Available in Black and Silver

This tube-style handlebar conversion replaces the cast handlebar of the RS with our exclusive and ergonomic yet sporty tube-style handlebar. The more upright seating position not only makes the RS much better for long distance journeys, it also significantly improves handling.

Details:

Ergonomically offset handlebar for optimum seating position
Includes adapter for attaching the original handlebar ends
Aluminum tube-style handlebar with 32 mm diameter
Pre-drilled for easy fitting of the handlebar fittings
Upper handlebar mounts included
Width / height / offset 798/100/172 mm

NOTE: Changes from stock bar position: 2.25" Wider x 2.75" Higher x 1.25" Back. Some Applications my also require extending clutch and brake lines with Wunderlich Adapters # 31002202

Wunderlich
31000-501
31000-502

*Installation estimated at 60 minutes for this part may vary depending on skill level.

Instructions

Reviews
Write a review

Currently Viewing Reviews with a rating of 5. Click here to reset.

★★★★★ ★★★★★

4.95/5 Stars out of 21 Reviews

Write a Review

5 ★

4 ★

3 ★

2 ★

1 ★

Pages 1 2

Conversion: Tubular Bar

★ ★ ★ ★ ★

Larry (SC) | April 19th, 2026

I previously had Helibars on my RS. While the riser helped reduce the forward lean a bit, I was still looking for something more comfortable for longer rides. I also wanted better leverage for tackling curvy mountain roads. This setup delivered on both fronts—the bike feels more flickable and significantly more comfortable. The team at Wunderlich was excellent. I went there in person and had them handle the installation. Everyone was friendly, knowledgeable, passionate about riding, and easy to work with. I highly recommend them.

Verified Buyer

2020 BMW R1250RS bar conversion

★ ★ ★ ★ ★

Francesco Melfa (NJ) | March 13th, 2026

These tubular bars are exactly what I needed. The kit comes with everything you need including easy to follow instructions. I was hesitant about rerouting the clutch hydraulic line to get more slack, since I was concerned about having to bleed the system. But the instructions covered how to bleed from the top reservoir and it worked perfectly. I was of the mindset the bleeder had to be opened which is NOT easy to get to just above the exhaust system and extremely tight access.

Verified Buyer

Excellent upgrade for my BMW R1250RS

★ ★ ★ ★ ★

Pete (Reno, Nv) | August 7th, 2025

I have a 2022 BMW R1250RS with the clip on style handlebars. Hated the stock bars. Way too “wristy” and uncomfortable. After much research, I decided to have the Winderlich bars installed. When the package arrived, everything was well packaged. Had them installed by my local dealer with no problem what so ever. No issues with the brake or clutch lines either, the bars fit perfectly. Did not even need to use those unsightly brake or clutch line extenders. As far as the riding position, it is spot on for making the bike more comfortable and fun to ride. I should have installed these sooner.

Show All Reviews

Verified Buyer

2022 BMW R1200RS Handlebar Conversion

★ ★ ★ ★ ★

Gregg F (Florida) | July 28th, 2025

What a difference - no more sore wrists or numb hands. Worth the $$$ imo. Installation time about two hours, kept referring to the YT videos as the factory instructions are...interesting.

Verified Buyer

These are the bars that should have come with the bike!

★ ★ ★ ★ ★

Larry S (Atlanta, GA) | June 20th, 2025

The rider position on my R1250RS is a little more toward "sport" than "touring." These bars raise the position to something more like a GS. The fit and finish of the bars and included hardware is first rate as expected from Wunderlich.. They look very OEM. It's not too difficult to install them. However, the printed installation instructions are worthless. There are several DIY videos on YouTube which will make the process easier. Go slow when you are removing your switch gear and handlebar controls. Make note of where each screw and bolt came from. Overall I am very pleased with my purchase.

Verified Buyer

R1250RS Handlebar Conversion

★ ★ ★ ★ ★

GUILLERMO DIAZ FARIAS (Nuevo León) | July 11th, 2024

Parts and service were great, I'm still in the proces of fixing the product to my bike, so I will return later with a more complete comment, but so far everything is excelent.

Verified Buyer

Completely Satisfied

★ ★ ★ ★ ★

Bede Crawford (Rio Rancho, NM) | December 30th, 2023

The riding position is more comfortable. The steering is quicker and lighter. I am now more in the wind stream so more noise. The install was not complicated. I recommend the Hornig bar install video. I used a clutch adapter instead of rerouting. I should have done this much sooner.

Verified Buyer

Handlebar conversion 2023 R1250RS

★ ★ ★ ★ ★

Frank Netardus (Austin, Texas) | December 12th, 2023

Received the conversion and took about an hour to install. I had the bike disassembled down to the handlebar already. Read the instructions several times online and read the reviews also. Fit and finish is great. Just had to cut a couple of factory zip ties on the forward frame to give the brake and clutch hoses some extra slack. No need to re-route the clutch line as in the instructions. I had a set of Heli-bars installed before but I wanted a little more up and back. These bars provide that. I am still experimenting with rotating the bars through the indicated range.

Verified Buyer

Awesome product

★ ★ ★ ★ ★

Dave Lawrence (Port Orchard WA) | October 20th, 2023

The tube style conversion handlebars are a fantastic upgrade. The beautiful styling is second to none. The ergonomics with these bars are fantastic putting you in a more upright riding position for longer rides. The packaging is super with really nice cloth bags that can be reused. You will not be disappointed with these upgrade bars or any Wunderlich products for that matter. You pay more for these, but the quality products won’t ever have to be replaced on your bike. Once and done.

Verified Buyer

RS tubular bar conversion

★ ★ ★ ★ ★

Larry Rogers (Troy Ohio) | August 25th, 2023

Excellent fit and finish, will need a Torx T8 wrench to complete installation. You can either reroute the clutch line or Hornig makes an adapter for $48 to give enough length. It will connect without either but it puts a lot of tension in the clutch line in right turns. The adapter sorts that. Transforms the bike into a Megamoto with a better fairing and more power. Much more control authority over the steering. Well worth the money!