My Cart: 0 item(s)

Your Shopping Cart Is Empty
LeverGuard
    Purchase LeverGuard
    • Part # 20360102
      LeverGuard

    • (4.6) 18 Reviews
    • $158.95

    • Not currently in stock. Typical delivery: 4-5 weeks.
      Caution! Our LeverGuard does not fit all bike models. Please select your bike if you are not sure.

       
      Write a Review

    Description Instructions Reviews Video Accessories Bike Fitment

    Description


    LeverGuard

    The ideal protection for the ParaLever final drive!

    This clever protection bar attaches to the bottom of the final drive housing and effectively protects the final drive and ParaLever pivot from damage, should the asphalt come closer than desired.

    The LeverGuard prevents damage to the aluminum housing and in extreme cases, it can even prevent leakage caused by damage to the radial seal.

    The LeverGuard costs only a fraction of what repairs would add up to if this part of your bike were to be damaged. Installation is easy and it requires absolutely no changes or modifications to the motorcycle. The LeverGuard will leave no trace of ever having been installed and it can be seamlessly removed at any time. A CNC Machined clamping piece permits this easy and sturdy attachment.

    In contrast to other crash pads available, the LeverGuard elegantly follows the inherent lines of the ParaLever and becomes an unobtrusive and discreet accent. Form and function of the LeverGuard differ however: The part is very strong and effective at absorbing energy due to its hybrid construction of an elastic steel core and thick polymer coating.

    The LeverGuard provides added protection both on road and off road and even in extreme lean angles, it will not reduce cornering clearance.

    Instructions



    Reviews



    Verified Buyer
    05/15/2017
    Solid Piece
    Hardest part of the install was re-securing the sensor wire with the bleeder cap. Very easy.


    Clifford Musante
    10/22/2015
    Good protection - Very easy to install
    I have not tested whether, or to what extent this protective piece will protect the trailing arm of the GSA. That said, it seems like adding this protection provides a great way to add security to an area of the bike that is vulnerable. This piece is very easy to install, and I was impressed with the way that the mounting design was developed.


    Wayne
    08/24/2015
    👍🏻👍🏻
    Great product easy to install and dose a great job on protecting the rear drivetrain. I would highly recommend it to anyone.


    dmitri
    07/17/2015
    Similar to Insurance I prefer never to use this device!
    Purchased for asthetics only! I liked the look in the brochure and a touch of black contrasted against the silver enhances the appearance of the bike! Installed on my Black n Silver R1200rt. Amazingly Simple Installation!


    Jim W
    07/04/2015
    Well worth it.
    I can't imagine thinking of the jig needed to make this piece. The angle of the mount plate seems almost convex to mate properly with the final drive. Very well thought out, fits perfect. I do wish the instructions were in English, but that's what Google translate is for.


    Jim W
    07/04/2015
    Beautifully simple and well made.
    When you get this out of the bag, you first (may) think "I paid how much for what?" until you install it. There's a lot of thought and quality machining that went into building this. Definitely worth it.


    Lee
    06/26/2015
    Poor New Design
    First - received the installation instructions in German - WTF?If you look closely at the installation video and the German vs English instructions you'll see the old version (3 in wide) had a cutout that slipped on the boss on the final drive. The new version (1.5 in wide) only attaches by the bolt and during a tip over will spin on the stud and will hit the final drive. Sent it back. Too bad, good idea.


    albert harris
    06/22/2015
    gear box protetion
    important piece of protection for the rear gear box


    Whitney
    06/13/2015
    Worthwhile item
    As described, A very robust part, Easy to install and inconspicuous on the bike, Appears that it will protect the final drive adequately in the event of a tip over..


    Hakan Edstrom
    05/03/2015
    Leveraging protection
    Yes, the Lever Guard is costly but the quality is outstanding and it is decorative as well. It makes me feel good and makes the bike looks smart.


    Alex
    04/24/2015
    BMW R nine T
    Fits my bike well. Very good purchase for peace of mind. ;)


    Larry Damman
    09/13/2013
    Nice Piece
    Easy installation, and a good looking piece. -1 star because it's waaay overpriced.


    Don Clark
    11/15/2012
    This Should Do The Job
    I've installed the LeverGuard on my 2011 12GS. Very simple to install. I like the way the unit looks and feel that it should provide the protection needed in case of an accident. Each to their own, there are a couple of ways to go to protect the final drive, but I like the looks of this one. Yes, it's expensive, I guess, but so is replacing a damaged drive. It's rock solid, looks great, and is a breeze to install. Works for me.


    Jim
    10/09/2012
    Top Notch
    It took me longer to think about installing this guard than it did to just install the darn thing: piece of cake. Adds that extra bit of protection, especially from rocks, sticks, logs, etc. that approach the final drive from below.


    Art
    06/23/2012
    LeverGuard-K
    Not sure how this could have been easer to install. Almost did not need the directions.


    Greg
    06/10/2012
    Couldn't be easier
    Nice piece of kit, and as the title says the installation couldn't be any easier...if it takes you more than 5 minutes to install this, you are truly "challenged"! I rated it 4 stars vice 5 due to the price...I would love to see the profit margin on this item...it couldn't cost more than $20 to manufacture. But it is nicely made...as long as it functions as intended when needed, it will be worth it.


    Howard Sankey
    04/10/2012
    Meets the need
    This excellent product meets the need! Simple installation, seems very durable and as I get older I feel comfortable with the added protection if ever I need it. All GS owners should have one!


    Roy
    03/23/2012
    LeverGuard
    Lever Guard installs quickly, looks good and should do well protecting the final drive. Haven't put it to the test yet luckily.




    Product Videos



    Related & Recommended
    Products





    Popular Products




    Bike Fitment


    R1200 GS

    2013 · 2014 · 2015 · 2016 · 2017 · 2018

    R1200 GS Adventure

    2014 · 2015 · 2016 · 2017 · 2018

    R1200 R

    2015 · 2016 · 2017 · 2018 · 2019

    R1200 RS

    2015 · 2016 · 2017 · 2018 · 2019

    R1200 RT

    2014 · 2015 · 2016 · 2017 · 2018

    R1250 GS

    2019 · 2020

    R1250 GS Adventure

    2019 · 2020

    R1250 R

    2019 · 2020

    R1250 RS

    2019 · 2020

    R1250 RT

    2019 · 2020

    Sign Up For Our Newsletter






    This website uses cookies to identify visitors, track visitors to our website, store login session information and to remember your user preferences. By continuing to use this site you agree to our use of cookies. Learn More.

    This website uses cookies. By continuing to use this site you agree to our use of cookies. Learn More.

    Accept