My Cart: 0 item(s)

Your Shopping Cart Is Empty
Mirror Adapter, LC
    Purchase Mirror Adapter, LC
    • Part # 3272971
      Mirror Adapter, LC

    • (4.6) 7 Reviews
    • $54.89

    • Availability: In Stock
      Caution! Our Mirror Adapter, LC does not fit all bike models. Please select your bike if you are not sure.

       
      Write a Review

    Description Reviews Video Accessories Bike Fitment

    Description


    Mirror Adaptor, LC

    Though the original mirrors are well placed to provide wind protection, they are not in the optimal spot for a clear view of what's behind. The position of the rear view mirrors is inherently low, and you need to look down to get a view of what's behind. Installing a set of supplemental mirrors is easy and it allows rearward vision in the same plane as the road ahead.

    These adapters are threaded to accept a M10 x 1.5 mirror stud. The 10mm size is fairly common and you can mount a variety of mirrors, including the BMW mirrors for the R1200 GS for example. The mirrors that we recommend for this application however are our Vario Flash mirrors. The Flash mirrors have a unique angular shape that compliments the lines of the RT. Additionally, they are angle adjustable, so that you can achieve the optimal position and avoid interference with the windshield. Sold individually: each side needs one adapter and one mirror.

    Important ordering information:
    If you want to install mirrors on both sides, you will need the following:

    • Two mirror adapters (additional option: Adapter Set 21211102)
    • Two mirrors (suitable versions can be found under the Related Products)


    NOTE: If your bike comes with a switch located on the lever perch, then you will need to order 3272366 so you can install the mirror and keep the BMW switch in its original location. See part #3272366 in Related Products


    Reviews



    Roberto
    Verified Buyer
    02/03/2020
    Mirror adaptor for 2016 R1200RT -Perfect
    Neat packing and parts description leaflet. More parts than needed and no directions included, but the video of the part page is very clear about how to use them.


    Ed
    Verified Buyer
    07/18/2019
    This product works
    Wunderlich still remaines a quality buying experience. Very helpful staff. This product, fit, finish, function is perfect. The need for more mirrors was important to me, especially because bar backs raised the grips causing visual interference with OEM mirrors. I recommend this product. They seem expensive but if you need them, they the options are limited.


    Bob P
    Verified Buyer
    07/06/2018
    Mirror adaptor for R1200RT LC
    Although more expensive than it should be; it is the only workable mount if you want to add a phone mount, mirror, radar detector, or SPOT to the bars of your RT LC. I am using it to mount my SPOT Gen III on my 2018 RT. I also had to order a RAM ball mount from RAM to complete my mount. It works perfectly; however, the mirror mount piece is not as wide as the original clamp piece and leaves gaps where the original piece was.


    Roger Mothersbaugh
    Verified Buyer
    06/04/2017
    R1200RT LC mirror adapter/mount
    Looks OEM, quality part, perfect fit. Quick shipping and well packaged. If you stocked the Ram mount 1" ball with m10x1.5 thread to go with it that would be very helpful as well, I'd have purchased 2 of them because I'm using them for mounting devices, not mirrors.


    James D Howard
    Verified Buyer
    05/01/2017
    Perfect Fit, OEM Appearance, Works Well with RAM Ball Mount
    While a bit expensive, the product is a perfect fit to replace the OEM part that does not have a mirror or RAM ball attachment point. The product appearance fits perfectly with the rest of the BMW handlebar equipment. Helpful torque spec cast into it. Please remember: if you are replacing the right-hand (clutch fluid) reservoir clamp on your bike, and it has the auxiliary lights switch, you need to order the alternate - but stylistically matching - Wonderlich part #3272366


    Rob Trunz
    09/21/2015
    Wont work with auxiliary light switch
    I agree with Dan. I'm not even sure if you can install a left side mirror if you have the BMW aux light switch. I just bought one for right side to install Ram ball for an X grip to hold phone which worked very well


    Dan Burtt
    05/07/2015
    Auxilliary Light switch on mirror clamp
    The video does not reflect that the 2014 RTLC has a separate switch for the auxiliary lights on the left handle bar that uses the same mount location as is shown for the added mirror mount. The video should be updated to demonstrate the installation of the added mirror on a bike with the auxiliary light switch installed.




    Product Videos




    Related & Recommended
    Products





    Bike Fitment


    R1200 RT

    2014 · 2015 · 2016 · 2017 · 2018

    R1250 RT

    2019 · 2020

    Sign Up For Our Newsletter






    This website uses cookies to identify visitors, track visitors to our website, store login session information and to remember your user preferences. By continuing to use this site you agree to our use of cookies. Learn More.

    This website uses cookies. By continuing to use this site you agree to our use of cookies. Learn More.

    Accept