My Cart: 0 item(s)
Description
Instructions
Reviews
Video
Accessories
Bike Fitment
Description
Integrated GPS Mount
With this part you'll be able to place your GPS in plain view and without obscuring any of the instruments or display information. Without the need to make the dangerous move of taking your eyes off the road for more than an instant, even in complicated traffic situations, a quick glance is now possible.
The two existing mounting points that we use to attach the bracket would normally not provide enough support for a GPS unit. Therefore our strong bracket design features a supplemental support that strengthens the mounting points from below, resulting in a rock solid integration.
Other methods of mounting your navigator are often times a compromise, for example there's typically interference with a tank bag or access to the ignition key is hindered.
Some Facts:
• Your GPS is in the optimal field of vision
• Better, safer navigation
• Solid support for your GPS due to elaborate reinforcement
• Easier reach to the screen and GPS controls
• Adjustable: position your GP at any desired angle
• Easy installation with no drilling or other modifications to your bike
• Lightweight, anodized aluminum
• Compatible with most GPS units: TomTom Rider I & II, BMW Navigator, Garmin Zumo, All units that utilize the claw adapter, Any PDA (combined with our Mediabag) Camera, video recorder.......
• Compatible with a Garmin Nüvi 500 series in conjunction with the adapter kit, part number 8600808 (available under the Related Products.
• Complete installation kit with clear instructions
• Made in Germany
Perhaps it's not immediately noticeable, but a great deal of effort was invested in the design and to make this part easy to install.
Wunderlich
21170-000
Important fitment note: For 2010 and later models, part number 8600888 is needed. Available under the Related Products.
Please Note: If you have a Garmin 660, please check the back of the cradle. If the back of the cradle is stepped where the power wire exits, you should additionally order 4 of the rubber mounts that are available under the related products. Alternatively, you can use 4 - 10mm spacers that you may be able to make or acquire locally.
Instructions
Reviews
Write a review
Currently Viewing Reviews with a rating of 5. Click here to reset.
32
5
1
0
0
Ronald Allen (Chillicothe, IL) | February 28th, 2011
I have a BMW NAv IV GPs but it hadbeen mounted by the dealer with a Tourtech mount. The Tourtech mount fit to the handle bars and with the tank bag on the GPS was hard to see and the instruments wer partially blocked. The Wunderlich unit is a far superior unit. It puts the GPS up where you can see it easily. The install was by the instructions and was relatively painless. The only drawback might be for people with a short reach as the GPS unit is a long reach from the drivers seat, however this is not a problem for me as I have a long reach. For the money this unit is the best I have seen. You will like it!
Rick (San Diego, CA) | October 28th, 2010
Once installed, the placement of the GPS is much better than the old position below the ignition. I have a Garmin 4 GPS, and one of the hole patterns fit perfectly. The only installation glitch was that the directions stated there should be 3 different sets of screws, but there were only two types, and they were not long enough to install the support bracket over the center support flange as they are not long enough to allow the small threaded bracket to fit as per the directions. I was able to work around this by fastening the ends of the bracket to the console, first with one screw in the center support, then swinging it into place, after which you can remove the end screws and follow the directions.
Product Videos
Related & RecommendedProducts
Popular Products
Bike Fitment
BMW R1200 RT
2005
· 2006
· 2007
· 2008
· 2009