My Cart: 0 item(s)

Footpeg Lowering Kit
    Purchase Footpeg Lowering Kit
    • Part # 31410101
      Footpeg Lowering Kit

    • ★★★★★ ★★★★★
    • $294.95

    • In Stock
      Caution! Our Footpeg Lowering Kit does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review


    Sign up to be notified when Footpeg Lowering Kit is back in stock!

    We will email you the current E.T.A. for Footpeg Lowering Kit
    Description Instructions Reviews Video Bike Fitment

    Description


    Footpeg Lowering Kit

    The original riding position is not universally comfortable for all riders (tall riders have different requirements than smaller riders). As part of our "Ergo" program we provide the components for each rider to "fine-tune" the riding position and posture to his/her own personal needs. The rider set will move the footrests ~ 30 mm (1.18") down and slightly forwards. The change in footrest position will increase the knee and hip angle, a benefit especially when touring. Better blood circulation and less cramps will make a full-to-empty tank ride much more enjoyable. The kit is made of CNC machined and silver anodized high quality aluminum alloy and comes with all components needed. TÜV tested and approved.

    When lowering the footpegs, the gear shifter and rear brake lever need to also be lowered accordingly. Our kit includes the hardware necessary to lower the rear brake. The shifter is lowered by adjusting the shift linkage.

    The facts:

    • Relaxed seating position.
    • TÜV Approved with ABE certification.
    • Reduced knee angle.
    • Machined from solid aluminum and anodized.
    • Doesn't require any modifications to the original support.

    Note: Fitting any footrest lowering kit may cause reduced cornering clearance. Please ride accordingly!



     Wunderlich
     31410-101
    *Installation estimated at 25 minutes for this part may vary depending on skill level.

    Instructions



    Reviews
    Write a review

    Currently Viewing Reviews with a rating of 5. Click here to reset.
    ★★★★★ ★★★★★
    4.78/5 Stars out of 27 Reviews
    5
    22
    4
    4
    3
    1
    2
    0
    1
    0
    Pages 1   2   3
    Verified Buyer
    Good for short riders too!
    (CA) | August 26th, 2024
    At 5'8" and riding two up all the time, I wanted to get both feet down flat so I installed a lower seat which made my knee bend to extreme for touring. I installed this lowered footpeg kit and got my comfort back. Riding moderately aggressive two up, I have not touched the pegs down. It was an easy install with the right tools and the great step by step video by Wunderlich helped.
    Verified Buyer
    Best Foot peg Lowering Kit
    (Northern California) | April 25th, 2024
    I have tried lowered foot pegs from other vendors and found them lacking. Primarily due to not maintaining the correct brake pedal relationship to the lowered foot peg. This kit from Wunderlich is beautifully finished and properly designed to maintain the proper brake pedal and shift lever heights corresponding to the newly lowered foot pegs. This is an excellent product.
    Verified Buyer
    Quality with added comfort
    (Gardnerville, NV (USA)) | October 4th, 2023
    This kit is well made and installs pretty easily. I took my time and it was about 1.5 hours on my 2022 RT. The foot peg retainer springs do require a little bit of muscle to get back into place. The new difference in foot placement makes the rider triangle a little more tolerable without sacrificing performance. I did find a couple of discrepancies between the instructional video and reality. The smaller peg set screws take a 2.0mm wrench and not a 2.5 as stated. Also, the direction to loosen the shift lever linkage was opposite to what was depicted in the video. ** Added tip ** I wrapped the tips of my screwdrivers with a small amount of duct tape to avoid marring the finish of the brackets
    Show All Reviews
    Perfect fit and more comfortable
    (North Carolina) | July 18th, 2023
    Upon buying this foot peg lowering kit, I figured I would put it on in about an hour, which is double the 25 minute guideline on Wunderlich site. I loved the video, as it was clear, concise and complete. I took my time using the video as my complete guide. The machined aluminum parts were very nice, first class product. Everything went perfectly right up until trying to put the spring back on the foot peg. The right side took me over an hour and a bloody finger before I finally got it on. The video guy made it look VERY easy. Of course, I am not a young whipper snapper either. It would get so close to going on then thwang! I took a break and ate dinner before going back to the garage to put the left spring on. It went on in about 2 minutes with 3 attempts. I pretty much mangled the plastic spacer on the RH side while trying to put the spring on, but the LH side was unscathed. Perfect fitting, perfect quality, better comfort and a GREAT video to boot. I highly recommend this kit. If I did it again, I am sure I would get it done closer to the 25 minute timeline....maybe 45 minutes. 5 stars without question!
    Verified Buyer
    Great RT accessory
    | October 30th, 2022
    Most farkles fall into the category of something you don't need this kit is not one of those. My knees were in pain and numb after an hour or so of riding from the position on my 2020 RT. I like the seat in the low position for stability on stops but even putting the seat in the high position did not significantly relieve the pressure on my knees. A friend suggested lowering the footpegs and I found this kit from Wunderlich. I watched the installation video before purchasing the kit and didn't see anything that set off alarm bells so I ordered it. Installation is easiest if you just watch the video and follow the demonstration. Don't bother with the printed instructions as you will likely get confused about the orientation of the mounts using both printed and video instructions. I rewatched that specific part of the video and had no problem. A picture is worth a thousand words. I fiddled a bit with the shift lever position but found a user video on YouTube which suggested measuring from the ground to the shifter at 12" I did that and then just fine tuned the position to my liking. It is perfect now. The brake pedal is super simple due to the nicely engineered bracket included in the kit. The end result is true long distance comfort on my RT. To be honest I was surprised BMW didn't engineer adjustability into the footpegs but c'est la vie. This kit fixed the problem for me and I am very happy with the new position and the quality of the entire kit.
    Foot peg lowering kit
    | October 13th, 2022
    Installed kit; did take me longer than 25 min. The spring clips for the foot rests were very hard for me to re-install. They unclip rather easily. The video really helped. Overall superb quality and my ride position is more comfortable. Allow more time to install. It took me 2 hours but I have very average mechanical skills.
    Verified Buyer
    Excellent Product
    | September 1st, 2022
    Just installed my footpeg lowering kit and am very pleased with how straight forward the process was. Parts are all high quality and the kit looks good on the bike. My riding comfort has really been improved. Took a couple of rides to get used to the new peg placement when putting my feet down coming to a stop but fine now. I also like the brake cylinder bracket as it preserves the brake pedal position with the new pegs. All in all, I highly recommend this product.
    Verified Buyer
    Peg Lowering Kit
    | June 5th, 2022
    I had to install a low seat, because I'm getting too old to reliably keep my R1200RT upright at stop lights on tippy-toe when it's loaded with camping gear. That solved one problem but created another; my 32" inseam legs were cramped on the stock pegs. I installed the lowering pegs, thinking that they would scrape, but that's the price of growing older and continuing to ride. The pegs are great quality, the instructions are perfectly clear, but you need to spend a little time with them before you reach for the wrenches, since they apply to several different models. There are Chinese knockoffs available for a quarter of the price, but they don't come with a TÜV booklet certifying their quality. I stand on my pegs sometimes to relieve strain on the road, and I'm not going to risk injury to save $150. I took the bike out today on some winding mountain roads in Vermont. Great news, the pegs do not scrape in some fairly aggressive riding (for a touring bike.) The brake pedal is well positioned in relation to the new peg location, and is easy to access for trail braking or parking lot maneuvering. The only issue is that the pegs move outward as well as downward, and after you adjust your shift lever for height, it will still be a little too far "inboard" of your left foot. Turning your foot on the peg to access the shift lever gets a little old. You might as well order the Wunderlich shift lever extension #8160432 at the same time, because you will probably want it.
    Verified Buyer
    Foot peg lowering kit
    | May 28th, 2022
    Foot peg lowering kit. Great workmanship on these CNC components. Well worth the money and it makes the bike a lot more comfortable on longer rides.
    Verified Buyer
    Peg lowering kit
    | April 10th, 2022
    Not cheap but the quality of the kit is top notch and after watching the YouTube video the installation was simple and straightforward. As advertised by lowering the pegs a little greatly reduces the angle of the knees and makes for a much more comfortable ride. I don't have to switch from the pegs to the highway pegs near as often. Well worth the price.
    Write Review:
    Footpeg Lowering Kit
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry1631652Arq!


    Product Videos





    Bike Fitment


    BMW R1200 RT

    2014 · 2015 · 2016 · 2017 · 2018

    BMW R1250 RT

    2019 · 2020 · 2021 · 2022 · 2023 · 2024

    Sign Up For Our Newsletter