Center Support for Engine Bars - GS 40 Year Edition, Yellow
Right on time for the launch of the 40 Years GS Edition BMW models “Edition 40 Years GS”, we’ve issued the matching compound strut wich perfectly integrate in the color scheme of the “Edition 40 Years GS”.
The compound strut functions as a connector for both the right and left engine protection bars. It runs in front of the alternator cover and screws directly onto the bore holes for this together with the bars. The strut incorporates an M8 threaded insert. The necessary screws and disks are included in the pack. Thanks to the compound strut, the effective forces in the event of a crash are also transferred from a protection bar on one side to both sides. Pressure and tensile forces are thus distributed across both sides. The forces that effect the engine via the bar composite are optimally distributed and greater damage can thereby be avoided. Function
Enhanced protection effect thanks to the greater stiffness of the compound structure
Equal, optimal distribution of forces to the protection bars on both sides via the compound strut
Minimal weight
Technical info
Material: Stainless steel
Diameter: 15 millimeters
Length: 250 millimeters
Made in Germany
Please Note: Exceptions to model/year fitment
Model:
Notes:
R1250 GS
Does not fit with 42772-002
*Installation estimated at 10 minutes for this part may vary depending on skill level.