My Cart: 0 item(s)

Wunderlich Folding Headlight Guard
    Purchase Wunderlich Folding Headlight Guard
    • Part # 26660300
      Wunderlich Folding Headlight Guard

    • ★★★★★ ★★★★★
    • $175.95

    • In Stock
      Caution! Our Wunderlich Folding Headlight Guard does not fit all bike models. Please select your bike if you are not sure.

       

    -
    Write a Review


    Sign up to be notified when Wunderlich Folding Headlight Guard is back in stock!

    We will email you the current E.T.A. for Wunderlich Folding Headlight Guard
    Description Instructions Reviews Video Accessories Bike Fitment

    Description


    Wunderlich Folding Headlight Guard

    This protector is made of a transparent, clear and shatterproof Lexan material, supported by a laser cut, coated black steel frame. This type of protector will prevent even the smallest particle from smashing against your head lamp. At the top, there are two brackets attached with ball sockets and in the corresponding location on the headlight guard are rubber sockets, so the guard positively snaps into place and the guard is then supported at four points.

    The top of the guard can be 'snapped' out of the fastening points and folded down easily for cleaning.

    Details:

    • Optically clean and shatter proof Lexan screen.
    • Adjustable position of protector allows finding of best position, reduces reflection.
    • Scratch-resistant protector with robust, coated brackets.
    • Can be quickly put in place for off-road use.
    • Easy to clean lamp and protector.
    • Easy to fit

    NOTE: Designed to fit the Water Cooled R1200 GS from 2017 - on, R1250 GS, R1250 GSA - unfortunately not for the R1200 GSA


     Wunderlich
     26660-300
    *Installation estimated at 30 minutes for this part may vary depending on skill level.

    Reviews
    Write a review

    ★★★★★ ★★★★★
    4.75/5 Stars out of 12 Reviews
    5
    9
    4
    3
    3
    0
    2
    0
    1
    0
    Pages 1   2
    Verified Buyer
    Superior product
    (NH) | April 28th, 2024
    High quality craftsmanship, no doubt. And the video instructions are essential - I had to watch several times. But beware, mounting those base nuts while accessing from underneath the GSA beak is quite a task. I had to wedge a small wood shim (eg., popsicle stick) on the top side to maintain pressure (preventing the nuts from popping out) and allow me to screw in the base bolts with a socket wrench from below. Lesson learned.
    Verified Buyer
    2024 BMW GSA 1250 Headlight Guard Review - Excellent Product!
    (Valrico Florida) | April 20th, 2024
    I found the product to be top quality but the installation process a bit frustrating. Highly recommend but search some videos on the others experience when installing to help make it smoother for you. I did a short review video here you may find helpful. https://www.youtube.com/watch?v=-dtxayI-FdQ
    Verified Buyer
    So far so good
    (NW Florida) | September 23rd, 2023
    R1250GS/ So far so good. Seems like quality and compliments look of bike. Works great. Cannot tell any difference in the lighting at night. Ride the interstate part way to work and back and just feel better having the expensive headlight protected. All my bikes and truck windshield have been hit and and minorly damaged from debris over the years. The ability to flip down the cover to clean etc is what sold it. Wasn’t the cheapest but not the most expensive either.
    Show All Reviews
    Verified Buyer
    Perfectly Engineered
    (South Dakota) | June 1st, 2023
    Fit my 2023 GSA perfectly. I’m always impressed with the quality that comes from Wunderlich.
    Verified Buyer
    Simple install, but watch the video first
    (Sacramento CA) | May 27th, 2023
    Always quality parts from this shop. The thoughtful engineering makes it easy with basic tools to do the installation. If it takes you 30 minutes, you didn't watch the video. Great product!
    Verified Buyer
    Fantastic!
    (Arizona) | April 3rd, 2023
    This looks great once installed. Read the review for installation tips for mounting the lexan with the rubber fastener from Tom Brown, it'll help. I didn't and spent time doing what he did trying to figure out how to attach the lexan to the frame. This is a very high quality piece and well engineered. Highly recommend.
    Verified Buyer
    Folding headlight guard
    (Virginia) | February 6th, 2023
    Well engineered and designed. This was my choice over several of the other guards that are offered for my 2023 1250 GSA. It has a great folding mechanism and it’s easy to clean both the Lexan and the headlight. Installation is a bit tricky, but the video is very good. Written instructions are very marginal. on my trim, triple black, I had to manually pull back the plastic fascia in order to get the lower nut to fit down into the recessed channel for the lower Allen screw. For the Lexan connection to the metal frame, the screws for the rubber washers are purposely slightly short, and you have to put some tension /pressure on these as you are screwing them into the rubber washer in order to capture the thread and provide compression as you are screwing the screw into the threaded component of the rubber nut. You Do not need to buy longer screws as some have suggested. Overall, I give this five stars and it definitely complements the engineering of the BMW MOTORCYCLE
    Verified Buyer
    Now that it's on...I like it.
    | April 30th, 2022
    There is a key point that is missed in the instructions. I have a GSA and wanted a Lexan cover for the headlight. The Lexan piece screws in with 4 fasteners. They thread through the holes in the holder and the Lexan, then into 4 rubber posts with a brass threaded piece inside. If you put this together as the illustration shows, the 4 screws will not touch the inner threads of the rubber posts. So...you have to really push hard on them until they do...and this is not made clear. I tried putting the posts in backwards and lots of other things before finally trying this. I was about the return the whole thing. When you push hard, the threads can engage, then they compress the rubber cause it to expand against the holes in the Lexan, holding it firmly close to, but not touching the metal holder and away from the light source. Perfect!!! It's a great design. The resistance of the hinges can be adjusted by tightening or loosening the threaded hinge bolts a litle. The washer set allows them to hold the tension. I put a little vaseline in the rubber fasteners to make them a little easier to undo. They're pretty tight. Silicone would probably do as well or better. I wanted something that would be easy to clean, wouldn't destroy the optics of the light and would look good. This does all that. Great!.
    Verified Buyer
    Spot on design
    | September 20th, 2020
    Originally with my bike, I had ordered the OEM headlight guard, but when I started to install it, I was sorely disappointed so I took it back. It leaves a gap in between the headlight and the screen which makes cleaning the surface of either quite difficult, unless you get some tools and remove it. I really like how this one has a hinge on the bottom and you just swivel it down to clean it. While it is attached, it's really a strong hold, so even over rough road it has not come undone.
    Verified Buyer
    Headlight Guard
    | June 8th, 2020
    This is a must have accessory, typically made well and easy enough to fit. My two very small complaints with it are: 1, The Self Locking Nuts that are supplied to attach the “Studs” for the quick release sockets, are far too stiff to fit to the Plastic stud. There is no way to hold the stud without damaging it while doing up the nuts. I replaced these with standard nuts and spring washers. 2, If at all possible, could the hinge points have been designed to be Behind the guard rather than out in front. Just a small issue, but it may have looked better.. Fast and efficient delivery to NZ. Thankyou.
    Write Review:
    Wunderlich Folding Headlight Guard
    • Click/Tap a star to rate. 5 stars is the best.
    • All fields are required except "where you're from".
    • Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

    Thank you for your review!

    Enter only the red text:  3Ry2232279Arq!


    Product Videos



    Related & Recommended
    Products






    Bike Fitment


    BMW R1200 GS

    2017 · 2018

    BMW R1250 GS

    2019 · 2020 · 2021 · 2022 · 2023

    BMW R1250 GS Adventure

    2019 · 2020 · 2021 · 2022 · 2023 · 2024

    Sign Up For Our Newsletter