Name: Engine Protection Bars, Silver
Brand: Wunderlich
SKU: 8160735
Price: 469.95 USD
Availability: InStock

Description Instructions Reviews Video Accessories Bike Fitment

Description

Engine Protection Bars, Silver

With these engine bars, we've applied our extensive experience in Engine Protection Bar design and once again hit a home run. This completely new design, developed especially for the R1200 RT, provides outstanding protection in more ways than one. Not only does it protect the valve covers from damage, it also protects the sump. The engine guard securely mounts at six optimally placed mounting points which share the load and protect from serious damage in most tip over situations. Cornering clearance is not compromised and all routine maintenance can be carried out without the need for removal. Installation is easily carried out with basic tools and no cutting or modification of any type is required. The engine protection bar is available in either a chrome finish or powder coated silver. The bar looks great and integrates perfectly with the RT's design.

Check out these facts:

Even load distribution
Protects cylinders and fairing
Protects sump and oil filter
Strong mounting system
Removal not required for maintenance
Precision steel construction
Cornering clearance not compromised
Easy to install
No modifications needed
Available in silver or chrome (chrome under Related Products tab)

Please note the following:

These bars are not designed to be compatible with the Original BMW accessory valve cover protectors.

Please Note: The video for this product shows a bike that also has the saddlebag protection bars installed.

Wunderlich
20380-001

*Installation estimated at 45 minutes for this part may vary depending on skill level.

Instructions

Reviews
Write a review

★★★★★ ★★★★★

4.62/5 Stars out of 39 Reviews

Write a Review

5 ★

4 ★

3 ★

2 ★

1 ★

Pages 1 2 3 4

15 minutes return

★ ★ ★ ★ ★

J L Walker (Laurel, MS) | May 31st, 2012

I received this item really fast. With the J-pegs this item would not fix the bike. I call the company and a man said just return the item. Two days later I had a full refund. Great customer service. I would highly recommend this company, great tech support.

RT engine Guard

★ ★ ★ ★ ★

Tim Becker (Erie, PA) | May 15th, 2012

Took about 30 minutes to install the engine guard and everything fit perfectly. The Guards are not overly obvious, nor do they distract from the RT's lines. Even someone with extremely limited wrenching ability could install them in 30 minutes. This guard is very nice but I'd like to see them increase the diameter of the horizontal bar to 1" to facilitate a variety of aftermarket pegs instead of a select few.

Made me swear

★ ★ ★ ★

Alan Bright (Auckland) | May 12th, 2012

Look good when installed. A trying time fitting some parts especially the first one. No mention of having to remove a bolt on the left side before inserting the replacement, that made me swear. Had to use quite a bit of force to get every thing to line up. I would love to make the guys that make these fit a few!

Show All Reviews

Should have installed a long time ago!

★ ★ ★ ★

Richard (Clinton Corners, NY) | May 5th, 2012

After my RT dropped in the driveway, I regret not purchasing these earlier. Fairly simple to install, eventhough the bolts issued for the bottom-most atatching area were a bit too long (I had to buy some s.s.washers. Follow the directions to the letter! I suggest including the torque amounts as a part of each photo section/hardware used. Now, I need to purchase the rear/saddlebag protectors.

Not quite right

★ ★ ★

Tony (Nashville, TN) | February 17th, 2012

I have a lot of minor irritations on this one. It took "forever" to get. Several weeks after the order and of course a different shipment from the rest of the stuff. Installation was not easy because the fitment was "just off" enough that I had to make some slight modifications to get it to fit, such as trimming down the bottom support, cleaning up the welds to get it to mate to the engine block, brute force shaping of the side bars to get them to line up, etc. For the money, I expected better. Dont try to install without a good quality mallet. Once installed, I'm satisfied with the look and function.

★ ★ ★ ★ ★

Nikolai Kolodyaznyy (Armavir) | October 11th, 2011

Easy to install, it provide good engine protection

Good Engine Protection

★ ★ ★ ★ ★

Robert Charron (Prevost, QC) | August 4th, 2011

Easy to install, it provide good engine protection.

Nice Bars

★ ★ ★ ★ ★

Ian Mitchell (Swift Current, SK) | May 22nd, 2011

Bars were easy to install. Good all round protection. They look very nice and are out of the way. Shipping to Canada was very smooth and quick.

Engine protection bars r1200rt

★ ★ ★ ★ ★

Robert Meyers (Columbus, OH) | May 21st, 2011

Items were obtained prior to vehicle delivery. I installed them the same day, fortunately, as I got careless pushing the RT off the center stand, and laid it down, not too gently. Only damage was small scratches on the protection bars and a small scrape on the rear of the valve cover. I believe the bag protection bars would have prevented even this if they had been installed. Installation was extremely easy, and accomplished by one person (Me) with the vehicle on the side stand. After my initial experience, I can only say I believe they are well worth the expense. They look good on the bike, and Iliumworks highway pegs look good and work well with the product.